Table of Contents
What stick is used for flute?
Depending on your desired key for the flute, the diameter should be between 3/4 and 7/8 inches. Bamboo sticks with thin walls of approximately 1/8 inches produce the best sound.
Does a flute use a reed to make sound?
Saxophones, clarinets, bassoons, and oboes all use reeds, and hence are classified as woodwinds. Flutes do not use a reed, and you might intuitively think that this fact would exclude them from the woodwind family as well. However, flutes still use an acoustic principle which is similar to the concept of a reed.
How many reeds does a flute use?
A single reed is clamped to a mouthpiece at the top of the instrument and vibrates against the mouthpiece when air is blown between the reed and the mouthpiece. Two reeds tied together are commonly known as a double reed.
Does a flute have a reed yes or no?
How to play woodwind instruments. Most woodwind instruments need a mouthpiece with a reed – a thin piece of wood – to vibrate that will be amplified by the instrument. However, an instrument like the flute does not need a reed mouthpiece and must be blown as if you were blowing across the top of a bottle.
How does a bamboo flute work?
Bamboo flutes are played horizontally rather than vertically, in a very similar style to the western-flute. Keep your elbows out to your sides rather than pinching them close to your body, and try to not hunch your shoulders. A loose, relaxed form is going to help you produce the best sound.
Do woodwind instruments have reeds?
The woodwind family includes many reed instruments, such as the clarinet, saxophone, oboe, and bassoon. These instruments rely on the vibration of a single or double reed (a piece of cut cane) to create a sound. The family also includes other non-reed instruments such as the flute.
How do you make a bamboo flute?
Next steps to making a bamboo flute
- Once the bamboo is prepared, measure from the node, measure 2cm out and mark with a pencil.
- Carefully cut along the pencil line with a hacksaw and sand the end to make it smooth.
- The embouchure or mouth piece should be one inner diameter length from the cork.
How do you make a flute with straws?
What you do
- Cut the straws in all different sizes.
- Lay a piece of tape down with the sticky side facing up.
- Once the straws are placed, wrap the ends of the tape up and around the other side of the straws until the ends meet.
- Have fun playing your pan flute!
Is a flute single or double reed?
While the term flute is also used to refer to a broad category of wind instruments, including instruments such as piccolo, recorder and fife, the western concert flute is typically considered to be a standard flute. This flute is a reedless instrument, but clarinet is not; it has a single reed.
Does a clarinet have a single or a double reed?
Clarinets (and saxophones) are instruments that use a single reed unlike the double reed of the oboe and bassoon (comparison). There is nothing the clarinet player depends on more, than the condition of his reed and reeds are sensitive and delicate.
Is the flute a good instrument?
The flute is one of the more popular instrument which means it’s also more competitive. The good news is that the flute is used in many different musical genres, a flautist has the opportunity to perform in bands, symphony orchestras, some jazz groups and small instrumental groups.
Is the flute and the clarinet related?
Clarinet and flute are two important members of the woodwind family of instruments. The main difference between clarinet and flute is the presence/absence of reeds; flutes are reedless instruments whereas clarinets have a single reed . In addition, the clarinet is an end-blown instrument whereas flute (western concert) is a side-blown instrument.