Menu Close

What is the spark plug gap on a chainsaw?

What is the spark plug gap on a chainsaw?

0.020″
What is the correct spark plug gap for my STIHL trimmer, chainsaw, or blower? The correct gap setting is 0.020″.

How many cc is a 015 Stihl chainsaw?

This chainsaw is not designed for industrial or commercial use and, because of this, features a smaller size engine at only 32 cubic centimeters.

How old is a Stihl 015 chainsaw?

“Introduced in 1973 and manufactured until 1983, the 015 was STIHL’s first small chain saw designed specifically for the “hobby” or homeowner market and was produced in several forms including a top handle version and a rear handle version. It’s power was around 2 BHP with a max RPM of 12,500.

What is the spark plug gap for a Stihl MS170?

Stihl MS170 Chainsaw Review

Stihl MS170 Chainsaw Technical Specifications
Spark Plug Gap 0.5mm, 0.02in
Carburetor Type All position diaphragm type with built-in fuel pump.
Fuel Tank Capacity 0.25 litre
Fuel Mixture 50:1 with Stihl two-stroke air-cooled engine oil.

What happens if a spark plug gap is too small?

The Spark-Plug Gap If the gap is too small, the spark will likely be too weak and cause the engine to run poorly or with poor efficiency. A spark-plug gap gauge both measures and adjusts the gap and is inexpensive and simple to use.

Are all chainsaw spark plugs the same?

Spark plugs are a key part of maintaining a petrol power tool, especially STIHL chainsaws, and you may think that one spark plug is much the same as another. A standard NGK spark plug and NGK spark plugs sold by STIHL may have the same part number stamped on them, but the STIHL NGK spark plug has some key differences.

How many cc is a Stihl 009?

009 L Chain Saw
DISPLACEMENT 40.8 cc (2.49 cu. in.)
ENGINE POWER 1.5 kW (2.0 bhp)
WEIGHT 4.1 kg (9.0 lbs.)
FUEL CAPACITY 290 cc (9.8 oz.)

How do you adjust the carburetor on a Stihl chainsaw?

They are the high-speed, low-speed and idle adjustments respectively. Determine the carburetor type before adjusting the high- and low-speed screws. To do this, turn the “L” screw clockwise as far as it will go, using a flat-head screwdriver, then turn it counterclockwise as far as it will go.

What size spark plug does a Stihl chainsaw take?

NGK Spark Plugs for Stihl Equipment

Gap 0.032″ (0.8mm)
Terminal Solid Nut
Thread Size 14mm
Tip Projected Tip
Type Resistor

What spark plug does a Stihl chainsaw use?

STIHL NGK spark plug
For the best performance from your STIHL tool, we recommend that you always use the STIHL NGK spark plug.

What happens if plug gap is too big?

Excessive spark plug gap results when the voltage has too far to travel. Excessive plug gap also results in cylinder misfiring, a possible no-start condition, wet, black or fouled plugs, engine hesitation and rough idle. Excessive spark plug gap also happens as result of normal electrode wear and age.

What is the permitted spark plug gap in general?

Spark plugs in automobiles generally have a gap between 0.6 and 1.8 mm (0.024 and 0.071 in). The gap may require adjustment from the out-of-the-box gap.

The correct gap setting is 0.020″. Similarly, you may ask, what is the spark plug gap on a chainsaw? The sparkplug gap on most chainsaws is . 025″. Subsequently, question is, what is the spark plug gap for a Stihl blower? The correct gap for a Stihl BG55 is . 02 inch or . 5 mm.

What should the gap be on a brisk spark plug?

Excessive changing of the spark plug gap setting will result in weakening of the spark plug ground electrode and can lead to breakage. Also, the spark plug gap should never exceed .055″ unless pre-set by the manufacturer. Most Brisk and other manufacturer sparkplugs are preset to around 0.75mm – 0.8mm.

What kind of spark plug does Stihl Chainsaw use?

Shop Stihl Chainsaw Spark Plug Parts NGK Spark Plug (BPM7A). The spark plug ignites the fuel and air mixture in the engine’s cylinder to power the engine.

How often should you change the spark plug gap?

The spark plug gap adjustment should not be changed more than 3 times and should not exceed .008″ in either direction. Excessive changing of the spark plug gap setting will result in weakening of the spark plug ground electrode and can lead to breakage.