Table of Contents
What is the purpose of a strainer in piping?
Piping Strainers (or filters) arrest debris such as scale, rust, jointing compound, and weld metal in pipelines, protecting equipment and processes. A strainer is a device that provides a means of mechanically removing solids from a flowing fluid or gas in a pipeline by utilizing a perforated or mesh straining element.
What is the advantage of a duplex filter?
Remove More Particles An inline duplex strainer will remove more particles or contaminants than a simplex filter, which is a more basic form of protection for pumps and valves. With a duplex strainer solution, your plant can process more product — and gain better control of particulates.
How does a duplex strainer work?
A Duplex strainer, or a Basket strainer, is made up of two distinct strainer baskets that are housed together. The suspended solids are trapped in a cleanable basket. A valve handle is put between the two baskets to restrict the flow of liquid to one strainer while the other is being cleaned.
What do colanders do?
Well, now you will. A colander is a kitchen utensil that is primarily used to rinse vegetables or strain foods such as pasta. The bottom is perforated, which allows for water or liquid to drain through while holding on to the solids inside.
How many filtering elements are in a duplex filter?
Actually the duplex filters are consists of two simplex filters, the duplex filter structure mainly include the basket filter housing, valves and basket filters.
How do Y strainers work?
Y-Strainer Application Information. Y-Strainers are devices for mechanically removing unwanted solids from liquid, gas or steam lines by means of a perforated or wire mesh straining element. They are used in pipelines to protect pumps, meters, control valves, steam traps, regulators and other process equipment.
What is Y type strainer?
Y-Strainers are devices for mechanically removing unwanted solids from liquid, gas or steam lines by means of a perforated or wire mesh straining element. They are used in pipelines to protect pumps, meters, control valves, steam traps, regulators and other process equipment.
What is simplex and duplex filter?
Simplex strainers require that the full basket be replaced with an empty basket and only after this process is complete can the flow be resumed. Duplex strainers are designed for the use of fluid handling where the flow cannot be shut down for basket cleaning or when the system becomes clogged.
What is the difference between strainer and colander?
A strainer is really a catchall name for any type of, well, strainer. It is usually fine mesh and bowl-shaped, good for rinsing a pint of berries or draining pasta. A colander is typically a larger bowl-shaped strainer, often with bigger holes (although that’s not always the case).
What do you need to know about a duplex filter?
The duplex filter indicator will tell you when you need to change and clean the filter element Filson Duplex Filter also called duplex strainer is composed of two single filters and a switching valve.
How are band pass filters used in a duplexer?
A duplexer typically consists of two band pass filters connected in parallel. One filter provides a path between the transmitter and the antenna, the other provides a path between the antenna and the receiver. No direct path between the transmitter and receiver exists.
What do you need to know about a duplexer?
A duplexer is a three port filtering device which allows transmitters and receivers operating at different frequencies to share the same antenna. A duplexer typically consists of two band pass filters connected in parallel.
How much flow does a Filson duplex filter handle?
Filson Duplex Filters can handle flow range from 25 L/min to 15000 L/min with working pressure up to 32 Mpa. With wide range of filtration precision 3 ~ 1000μm, Filson duplex type strainers provide a simple and cost effective way to separate particle impurities from hydraulic & lube oil systems.