Table of Contents
Fuse box location The Power distribution box is located under the right-hand side of the instrument panel. To remove the trim panel for access to the fusebox, pull the panel toward you and swing it out away from the side and remove it.
Locate your Lincoln Navigator’s starter relay located in the bottom right corner of the fuse/relay box. On your fuse/relay diagram it’s designated #101 (the first of the bottom three relays located in that corner).
The most common causes that hinders normal starting operation of your Lincoln Navigator are dead key fob battery, dead 12v battery, corrosion on battery terminals, bad alternator, clogged fuel filter, broken starter, blown fuse, empty gas tank, immobilizer error or any fault in the electrical system.
How do you remove fuse box on Lincoln Navigator?
To remove the fuse box cover, place a finger behind the PULL tab and your thumb above the PULL tab as shown in the illustration, then pull the cover off. To reinstall it, place the top part of the cover on the fuse panel, then push the bottom part of the cover until you hear it click shut.
When did the second generation Lincoln Navigator come out?
In this article, we consider the second-generation Lincoln Navigator, produced from 2003 to 2006. Here you will find fuse box diagrams of Lincoln Navigator 2003, 2004, 2005 and 2006, get information about the location of the fuse panels inside the car, and learn about the assignment of each fuse (fuse layout) and relay.
How do you remove the fuse box on a Ford Expedition?
To reinstall it, line up the tabs with the grooves on the panel, then push it shut. To remove the fuse box cover, place a finger behind the PULL tab and your thumb above the PULL tab as shown in the illustration, then pull the cover off.