How do you reset auto theft system?
Exit the car with all doors closed and the windows rolled up. Also close and any rear doors such as the trunk, rear hatch and front hood. Lock the car using the drivers side lock and walk away from the car at least ten feet. Wait for fifteen minutes and unlock the door, this should reset the security system.
Where is the anti-theft located?
Where is the anti-theft fuse located? It is usually located on the dashboard by the driver’s door, in front of your left knee. You may find the alarm fuse in this fuse box. If you do not find an alarm fuse inside of the car, look in the fuse box under the hood on the driver’s side.
How can I disable my anti theft system?
You can use best obd2 scanner to find the code and fix problem. Another tip you can use to try to disable your anti-theft system is to use the key in the door. You want to make sure to use the driver side door and the physical key to having a chance of this working.
How do you enter an anti theft code?
The word “CODE” or ” Please enter Anti-Theft Code” will appear on the display. Enter the 4-digit code by pressing the corresponding preset buttons in sequence. NOTE: If three consecutive attempts are made to enter an invalid anti-theft code the radio will enter a ‘WAIT’ state.
Why is my anti theft system not working?
It’s possible that the anti-theft system in your car won’t function correctly at some point. This may be for many reasons including a dead car battery that loses its key memory or a dead battery in your remote. It could also be that your immobilizer chip is damaged in your key or the car door lock is damaged.
How do I Turn Off the anti theft light?
Insert the key into the ignition and turn it to the on position, which activates your accessories but not the engine. Leave the key in position for about 10 – 15 minutes. Step 2: Check the anti-theft light again. If it’s no longer blinking, turn the key back to the Off position and allow it to set for a minute or two.