How do you turn off the low tire pressure light on a 2010 Toyota Prius?

How do you turn off the low tire pressure light on a 2010 Toyota Prius?

Put your foot on the brake and press the power button to turn the system on. Press and hold the TPMS reset button located below the steering wheel until the TPMS indicator light flashes slowly three times. Wait for a few minutes and then turn the vehicle off.

How do you reset the tire pressure light on a Prius?

Press and hold the TPMS reset button located below the steering wheel. Release the button after the low-pressure light blinks three times. Leave the ignition turned on for 20 minutes so the computer can calibrate each sensor. Turn the ignition off after 20 minutes.

How do you turn off the tire pressure light on a 2007 Toyota Prius?

Press and hold the TPMS reset button which is located below the steering wheel and hold it until the TPMS indicator light flashes slowly three times. Wait for a few minutes and then turn the Prius off and then start it up and the light should be gone.

How do you reset the tire pressure light on a 2007 Toyota Prius?

How do I turn off the tire pressure warning light?

Turn the car key to “on” but don’t start the vehicle. Press and hold the TPMS reset button until the tire pressure light blinks three times. Release the button and start the car. The light should go off within 20 minutes.

How do you turn off the low tire pressure light on a Toyota?

Hold the TPMS reset button until you see the flashing tire pressure light blink three times. Then release the reset button. Start the car and give it about 20 minutes for the sensor to refresh. The tire pressure monitor reset button is typically found under the steering wheel.

How to reset the tire pressure light on your car?

For most cars, all you need to do are the following: 1 Put your vehicle key in the ignition to turn the battery on. 2 Push the TPMS reset button until you see a flashing tire pressure light, which usually appears after approximately three seconds. 3 Start your vehicle. 4 Drive for about 20 to 25 minutes. 5 Turn your car’s ignition off.

What does the blinking tire pressure light mean?

Vehicles are equipped with indicator lights that warn drivers if something is wrong or needs to be done, and one of which is the Tire Pressure Monitoring System (TPMS) light. As the name implies, it helps you know if your tires have the right amount of pressure.

What’s the best way to check tire pressure?

Using a tire pressure gauge, check if each of your tires has the right PSI. Fill the tire with the right amount of air to achieve the correct PSI, and then deflate up to zero PSI. Re-inflate the tire and drive for a few minutes at a low speed, around 15MPH. This will calibrate your car’s tire pressure sensor the next time you drive your vehicle.

Is it dangerous to drive with the tire pressure light on?

Is It Dangerous to Drive With the Tire Pressure Light On? Driving with the TPMS light on or flashing due to low tire pressure is dangerous and can lead to car damages. First, driving with under-inflated tire/s will wear and tear your tires quickly and prematurely. Second, it will affect your car’s fuel consumption.