How do you reset the oil light on a 2004 Monte Carlo?

How do you reset the oil light on a 2004 Monte Carlo?

How To Reset Oil Change Light On Chevy Monte Carlo (2000-2007)

1. First, put the key in and turn it all the way to the right in the accessory position.
2. Then you pump the GAS pedal three times to the floor.
3. Once you did that you take the key turn the key back then you start the car and your change engine light has gone away.

How do you reset the oil light on a 2005 Monte Carlo?

Accelerator Method

1. Turn the Monte Carlo’s engine off. Leave the keys in the ignition in the “Run” position.
2. Press and release the accelerator pedal three times within five seconds. The “Change Oil” light will flash twice and then turn off. Repeat this procedure if it did not work the first time.

How do you reset the oil light on a 2007 Monte Carlo?

Reset Change Oil Light on Monte Carlo:

1. Display the “Oil Life Remaining” message in the Driver Information Center.
2. Press and hold the SET/RESET button on the Driver Information Center for more than 5 seconds (on vehicles without DIC, use the TRIP reset stem for SET/RESET)
3. The oil life will change to “100%”

How do you reset the change oil light on a 1999 Monte Carlo?

To reset the oil life monitor on a vehicle NOT equipped with a Driver Information Center, turn ignition switch to ON or RUN position with engine off. Depress accelerator pedal slowly to wide open throttle 3 times within 5 seconds. If the CHANGE OIL or CHANGE OIL SOON light flashes 2 times, the system is reset.

How do you reset the service vehicle soon light on a 2001 Monte Carlo?

To reset the light, turn the key to the on position WITHOUT starting the car. If the car starts it will not work. With the key in the on position, push the gas pedal down three times and hold on the last one until it resets.

How do you reset the oil change light on a Jeep Patriot?

How to Reset Oil Life: Jeep Patriot 2007-2014

1. 1-Turn the ignition to run (second position)
2. 2-Press slowly the accelerator pedal all the way down three times within 10 sec.
3. 3-Turn ignition OFF.
4. 4-Then turn the ignition to RUN or start the engine to verify if the oil life has been reset.

How do you reset the oil light on a Chevy Silverado?

To reset the oil life on your chevy silverado. Turn the ignition to the first position. Do not start the engine. Press the accelerator pedal slowly all the way down 3 times within a 5 second interval.

How do I turn off my service soon light?

Press and hold down the gas pedal for another 10 seconds. The service engine light should stop flashing. Turn the key in the ignition to the off position. The service engine soon light will now be turned off when you restart the engine.

How do you reset the service vehicle soon light on a 2000 Monte Carlo?

How long does it take to change the oil in a Chevy Monte Carlo?

The parallel model of Montecarlo was with the other GM brands of Pontiac Grand Prix, the Oldsmobile Cutlass- and the Buick Regal coupe. Time needed: 7 minutes. When the remaining oil life is low, the Change Engine Oil Soon message will appear on the display.

How do you change oil without starting the car?

Turn the ignition on without starting the engine. Press accelerator pedal to the floor three times within five seconds. If the “Change Oil Soon” light flashes, the system is resetting. Turn the ignition Off once the light stops flashing.

When did the Chevy Monte Carlo come out?

At the end of 1969, Chevrolet launched as an inexpensive entry into the former class two-door personal luxury car Coupe Monte Carlo. Technically, it is based on the simultaneous Chevrolet Chevelle, different from the coupe version of Chevelle in terms of style and resting on a longer wheelbase than the sedan Chevelle.