Table of Contents
What does IPC 620 stand for?
Cable/Wire Harness Assemblies
The IPC/WHMA-A-620 is a quality standard that describes the Requirements and Acceptance for Cable/Wire Harness Assemblies. It is an industry developed program for individuals and companies engaged in the manufacture, use and installation of cable and wire harness assemblies.
What does IPC 610 cover?
IPC-A-610 covers the inspection of the final product, which includes all of the above plus all the other issues related with final assembly, which are not covered in the soldering standard, such as connector, assembly, etc., and it has all the illustrations and pictures which defines the differences between the …
What is the current revision of IPC 620?
The IPC/WHMA-A-620 Revision D provides the electronics industry with the most current criteria for the performance and acceptance of cable and wire harness assemblies. This revision includes a synergy with IPC-A-610 and IPC-J-STD-001, aligning many of the requirements that are in common with IPC/WHMA-A-620.
What is IPC in soldering?
The Institute for Printed Circuits ( IPC ) is formed in 1957 with 6 PCB (printed circuit board) manufacturers. Many electronic companies joined together in association with IPC in 1977 for the purpose of interconnecting and packaging of electronic circuits.
How do I get IPC 610 certified?
This certification is two-tiered; individuals successfully completing a training course and certification examination. Optionally, individuals feeling that they do not need the training can take the challenge test to become certified. Certified trainers are then qualified to train application specialists on IPC-A-610.
What is the latest revision of IPC-A-610?
IPC Releases New “H” Revision to Two Leading Standards for Electronics Assembly, IPC J-STD-001 and IPC-A-610
- Section 8 is all new – Cleaning and Residue Requirements.
- 1.56 µg/NaCI equivalence/cm2 value for resistivity of solvent extract (ROSE) – no longer acceptable basis for qualifying a manufacturing process.
What is the latest revision of IPC 610?
How long is IPC 610 good for?
two years
Upon certification, you are expected to recertify every two years, though a 90-day grace period is available after expiration. For this reason, the IPC-A-610 certification remains an incredibly useful tool for those new to the field as well as seasoned veterans.
What is the difference between J-STD-001 and IPC-A-610?
For example, IPC-A-610 specifies mandated criteria that should be used daily by board inspectors. The J-STD-001, on the other hand, provides the best practices that process engineers, supervisors and technicians should follow to achieve acceptable boards.
What is IPC a 600?
IPC-A-600 is an individual level certification based on a standard published by IPC titled “Acceptance of Printed Wiring Boards”. This certification is for individuals working at organizations involved with the manufacturing of printed circuit boards, electronics assembly, OEMs and equipment/material suppliers.
What is IPC-A-610 Class 2?
IPC-A-610 Class 2 is typically what is required of Samtec’s products. For Class 2, a product will have a need for extended reliability, but is not essential for the product.
What is the difference between IPC 610 Class 2 and Class 3?
Class 2 is for dedicated service electronic products. “Class 3 includes products where continued high performance or performance-on-demand is critical, product downtime cannot be tolerated, end-use environment may be uncommonly harsh, and the product must function when required.”