Menu Close

How do you get trapped air out of a heater core?

Admin

How do you get trapped air out of a heater core?

​Start the engine of your car and allow it to warm up for a while. ​Once it reaches the operating temperature, the heater valve automatically allows the coolant to flow through the heater core. This action pushes the air bubble outside. ​Leave the car idle in this state for 15-30 minutes.

How do I know if I have air in my heater core?

5 Signs Your Heater Core is Leaking

  1. Your Car Smells Sweet. You may notice a sweet smell from your vents.
  2. Your car windows become foggy.
  3. Your car is blowing cold air into the cabin.
  4. Your car is devouring coolant.
  5. Your car’s cabin is cold, but the engine is hot.

How do I backflush my heater core?

Now, here’s how to perform a heater core flush:

  1. Step 1: Locate the Heater Core. First thing’s first.
  2. Step 2: Disconnect the Heater Hoses.
  3. Step 3: Apply the Pressure.
  4. Step 4: Hit it with the Hose.
  5. Step 5: Reconnect the Heater Hoses.
  6. Step 5a: Flush your entire cooling system with Thoro-Flush.
  7. Step 6: Refill the Coolant.

What happens when a heater core gets clogged?

If you have a bad heater core, you should bring your car in for repairs right away. Driving with a faulty heater core can be risky, as it can lead to overheating and extensive engine damage. Even a clogged heater core can prevent proper coolant circulation, causing your engine to run hot.

Where is the heater core on a Nissan Maxima?

The newer your Nissan Maxima, the more difficult it is to reach the heater core to replace it. In models made around the turn of the century, the core is located behind the steering column, meaning you mainly need to remove that. On more recent cars, the whole dashboard needs removal. Shut off power to the Maxima, especially the air bag system.

How to shut off power to the maxima air bag?

Shut off power to the Maxima, especially the air bag system. Disconnect the negative battery terminal and wait at least 3 minutes for the air bag to lose energy. Drain the engine coolant from the cooling system. Use a clean container if you plan on reusing the coolant. Disconnect the heater hoses from the heater unit inside the engine compartment.

How do you get coolant out of a heater core?

Point the inlet hose down toward the container. In order to clean the blockage out of the heater core, you will need to force either air or water through the system. As you do so, the coolant, water and grime within the system will be expelled through the inlet hose.

Why is my heater not working in my car?

If your vehicle’s heater isn’t working as well as it used to, or has stopped working entirely, it may be the result of a clog in your heater core. The heater core is similar to a radiator and is a part of the vehicle’s coolant system.