Menu Close

How do you set the clock on a 2005 Chevy Impala?

Admin

How do you set the clock on a 2005 Chevy Impala?

  1. Turn the key to “On” to activate the dash display.
  2. Turn the radio off.
  3. Find the “TUNE/DISP” knob.
  4. Just below this knob, to the left and right are two small buttons.
  5. Press and hold down the button you want to change for 3 seconds.
  6. You’ll hear a beep and see a small clock icon appear.

How do you set the clock on a 2005 Chevy Silverado?

Turn the key to the ON position. DO NOT start the ignition.

  1. Turn the key to the ON position. DO NOT start the ignition.
  2. Press the SET button located to the right, under the display.
  3. You can then use the SCAN/SEEK buttons to adjust the time. The left button is for the HOUR, and the right button is for the MINUTES.

How do you change the time in a Chevy s10?

Hold down the “HR” button on the audio systems panel until the hours place digits show the correct time. Press and hold the “MN” button to adjust the clock’s minutes to reflect the current time.

How do you set the clock on a 2000 Chevy Tracker?

Setting the dashboard clock in your Chevy Tracker takes just seconds.

  1. Locate the “HR” and “Min” buttons on the dashboard panel of your Chevy Tracker.
  2. Press the “HR” button repeatedly until the digits representing hours on the clock are set to the desired time.

How do you set the clock on a Chevy truck?

First, press the power button. Then press and hold the button with the clock on it. From there you can set the hours, minutes, months, days, and year.

How do you set the clock on a 2004 Chevy Cavalier?

Hold the minute arrow (MIN) for two seconds to enter programming mode. Press the hour arrow (HR) until the correct hour is displayed. Press the minute arrow (MIN) until the correct minute is displayed. Wait until the display returns to normal, then turn off the ignition.

How do you set the clock on a 2004 Chevy Silverado?

All You have to do is to turn the radio off and hit the Set button. After pressing the Set button, push the Seek button for adjustment of the time in hours, and the Scan button for the setting of the time in minutes.