What kind of oil does a 1999 Ford Contour take?

What kind of oil does a 1999 Ford Contour take?

Engine Oil

Viscosity:	5W-20 (All TEMPS) This specification has been updated from 5W-30 to 5W-20 per a Technical Service Bulletin from the manufacturer 5W-20 is the preferred viscosity.
Capacity:	5.8 quarts. (with filter)After refill check oil level.
Torque:	19 ft/lbs (Oil Drain Plug)

Will it hurt my engine to use 5w20 instead of 5W-30?

Can you put 5w20 oil in a 5w30 engine? No, your engine will be fine with the 5w-20. 5w20 oil is fairly light oil and is generally designed to work with newer engines. Motor oil has become part of a manufacturers program to allow engines to get higher fuel mileage.

Is 5W-20 oil too thin?

So, due to viscosity, 5w20 is a thinner oil during operating temperatures, whereas 5w30 is thicker during operating temperatures. A majority of manufacturers are now producing engines that operate on 5w20 oil, to which it’s important to stick to this viscosity and not substitute 5w30.

What car takes 5w20?

For model year 2001 and Newer: Ford, Honda, Chrysler and other OEM’s specify 5W-20 and 0W-20 motor oil for most all cars and light trucks.

What will happen if you put 5w20 instead of 5W-30?

If you accidentally put 5w20 instead of 5w30, this will not create a hazard on your engine. However, 5w20 instead of 5w30 is not recommended because 5w20 oil is a reasonably light oil designed to work with newer engines.

Is it OK to mix 5w20 with 5W-30?

You can mix a 5W20 with a 5W30 oil with minimal amount of issues provided it the same manufacturer and the same API classification. The question is ‘why would you?” If it is because you oil is low and the only thing available is a different grade then it might be fine until you can get it changed.

What happens if I use 5W30 instead of 5w20?

5w30 is a favorite in hotter climates, where a thicker oil is necessary to resist the greater heat. The engine will undoubtedly become hot, requiring viscous oil. While 5w20 is a favorite in colder temperatures, the faster engine starts because it has a lower viscosity and less friction in the engine parts.

Can I mix 5W30 with 5w20?

You can’t mix between regular/synthetic blend/full synthetic but mixing weights, especially if they’re by the same manufacturer, is no problem.

What happens when you use 5W-30 instead of 5w20?

What Will Happen If You Put 5w30 Instead Of 5w20? Using 5W-30 instead of 5W-20, you risk damaging your car’s engine because the internal engine components work with 5W-20 motor oil. 5W-20 and 5W-30 motor oil both have the same winter rating. It means that both motor oils have the same viscosity under cold temperature.

Is 5w20 good for summer?

As a general rule, you’ll get the best protection in the summer when you use a slightly thicker grade of oil, such as a 10W30 instead of a 5W30. Engines need a thicker oil in the summer months because of the summer heat and its effects on thinning the oil out.

When to use 5w40 instead of 5W20 oil?

If you drive short distances only and engine remains cold, then using W40 instead W20 is Sometimes you should. If it is an old car and takes oil between changes, then usually choosing thicker oil helps. Also when driving hard in very hot climate, the thicker oil helps.

Can you use 5W20 instead of 5W30 in a Mustang?

In one car they used 5w20 and in the other they used 5w30. Their findings were that the Mustang with 5w20 did experience a fuel economy increase of 1% but reduced the total lifetime of the engine by 30%. To me, that’s just not worth it.

Is the SAE 5W-20 grade good for your car?

All 2001 and 2002 vehicles where SAE 5W-20 is specified should be serviced at the recommended oil change intervals using SAE 5W-20. This oil is an improved formulation to improve fuel economy. Testing has validated this viscosity grade can be used in many previous model year vehicles.

What’s the difference between 5 and 20 weight oil?

The 5 means that the oil will flow at zero celsius the same way a 5-weight oil would. The 20 and 40 mean that the oil will flow like a 20 and 40-weight respectively at engine operating temperature (180-195C usually). The actual viscosity of the oil is therefore the SECOND number.