Table of Contents
How do you make a welted pocket?
If you’re new to the world of sewing welt pockets, you can start simply with a single welt by following the steps below:
- Apply fusible interfacing to the fabric.
- Outline your pocket placement.
- Make the welt.
- Align your welt with the garment.
- Apply pocket lining.
- Create another stitch.
- Cut the pocket opening.
Is pocket square necessary?
One question we often get asked is whether you should be matching your tie and pocket square. The short answer is no. Although it might seem like an easy way to coordinate your outfit, matching your pocket square and tie or bow tie is a definite no-no in modern dress.
What is the difference between a pocket square and handkerchief?
What’s the Difference Between a Pocket Square and a Handkerchief. The pocket square is just for show. It belongs in the breast pocket of your jacket, where it can help accent your suit or complement your tie. The handkerchief is intended to be used, and it should be kept out of sight.
What can I use instead of a pocket square?
Handkerchiefs might technically exist for nose-wiping purposes, but as long as you don’t whip this one out to blow your nose, no one will suspect it’s not a real pocket square. Bandannas and small scarves may also serve just as well, as long as they are made from silk, linen or cotton, like traditional pocket squares.
What’s the best way to make a pocket?
Cut out your paper pattern when finished. Fold your pocket fabric into fourths, as you will need four layers to construct your two pockets. Cut around the pocket pattern, adding whatever seam allowance you prefer (I left 1/4″). Now it’s time to sew the pockets. Only sew around the curves, the flat part stays open.
How do you add pockets to a skirt?
To add side seam pockets, first download the pocket pattern here, then watch the video below to see how to add them. If the video below won’t load for some reason, you can also watch on YouTube here. To sew the pockets, line them up just below the waistline on each side of the skirt back and each side of the skirt front.
How do you sew a pocket in a dress?
Pin the pocket to the garment, then edge stitch it into place. After you’ve pressed the side and bottom seams into place, use pins to attach the pocket to your garment. Then, use an edge stitch about 1⁄8 in (0.32 cm) from the fold to sew the pocket in place.
How to sew a pocket with pressure foot?
1 If you line up the pressure foot with the folded edge of the pocket, the seam should be about 1⁄8 in (0.32 cm). 2 If you don’t have a sewing machine, you can sew the pocket in place by hand. 3 Remember not to sew the top of the pocket! Also, if you’re adding the pocket to an existing garment, take care not to sew the front and back sides of