Menu Close

What year did jeep switch to OBD2?

Admin

What year did jeep switch to OBD2?

OBD2 was introduced on all 1996 and newer model year passenger cars and light trucks sold in the United States.

Where is the OBD port on a 1993 Jeep Grand Cherokee?

OBD connector location for Jeep Grand Cherokee ZJ (1992 – 1998)

  1. The automotive diagnostic plug is located above the pedals.
  2. The OBD II port is visible above the brake pedal.
  3. Here is the OBD socket.

Is a 96 Jeep Cherokee OBD2?

The 96 is both II and I. OBDII should work, but if you have any doubts about its functionality, I’d find someone with a plain old OBDII reader and see what happens.

How do I find the code for my Jeep Cherokee?

How To Retrieve Your Jeep’s Diagnostic Code

  1. Insert the key into the ignition.
  2. Turn the ignition On-Off-On-Off-On within 5 seconds.
  3. Record the 2-digit DTC as displayed by the flashing MIL.

What does code 55 mean on an OBD1 Jeep?

Code 55 signals the end of stored OBD codes. You can repeat the key sequence as many times as needed if you were unsure of a code. *= Check Engine light will not illuminate at all times if this Trouble Code it present. **= Check Engine light will illuminate during engine operation if this Trouble Code is present.

Can you check the engine code on a Jeep Wrangler?

When Chrysler / Jeep came up with this idea for getting the engine codes, it was a very smart move. This generation of Wranglers and Cherokees had the most simple diagnostics of any other. You need no special scanner to get the trouble code.

How to turn on the Check Engine light on a jeep?

Using the ignition switch, at no point do you actually start the Jeep: Start with the ignition in the OFF position, Turn the key to ON, OFF, ON, OFF, ON stop .. leave the key in the ON position (Complete this sequence in under 5 seconds). Once you stop the key in the ON position, the check engine light will stay lit for a moment.

What do you need to know about the OBD port?

Try it out for free today. What is an OBD Port? The OBD Port, is the location where you can plug in any OBD tool into the vehicle to pull vehicle information. It is also the primary location of tracking devices such as dongles as the port provides ongoing power to the device.