How much is a water pump for a 2003 Chevy Trailblazer?
2003 Chevrolet Trailblazer Water Pump – from $44.99+ | AutoZone.com.
How do you remove a water pump pulley?
How to Remove a Water Pump Pulley
- Remove obstacles away from the water pump.
- Remove the engine’s timing belt or chain if necessary, as this is often in the way of the water pump.
- Remove the water pump belt from the water pump.
- Install the pulley removal tool to the water pump pulley.
- Tighten the removal tool slowly.
How do you install a new water pump?
Apply a thin coating of RTV sealant to both sides of a new gasket and install it on the replacement water pump. Position the water pump on the engine and apply the bolts, making sure the pump gasket stays in position. If you have a torque wrench, tighten the bolts to 89 inch-pounds.
How do you remove serpentine belt from water pump?
Rotate the drive belt’s tensioner pulley clockwise with the wrench and slip the serpentine belt off the pulleys. Make sure you know the exact path the belt is routed on the pulleys. Hold the water pump pulley in place with a strap wrench and remove the pulley’s four bolts with a wrench.
Make sure you know the exact path the belt is routed on the pulleys. Hold the water pump pulley in place with a strap wrench and remove the pulley’s four bolts with a wrench. Remove the pulley. Unscrew the water pump’s five mounting bolts with the flare-nut wrench and remove the pump; if the pump is stuck, tap it with a soft-faced hammer.
How do you replace a water pump gasket?
Clean all traces of the gasket material from the engine block using a rag soaked in acetone or lacquer thinner. Apply a thin coating of RTV sealant to both sides of a new gasket and install it on the replacement water pump. Position the water pump on the engine and apply the bolts, making sure the pump gasket stays in position.