What is used to measure the depth of a beaker?

What is used to measure the depth of a beaker?

Vernier calipers
To Measure Internal Diameter And Depth Of A Given Beaker/Calorimeter Using Vernier calipers And Hence Find Its Volume. Vernier caliper is a measuring device that has two scales: the main scale and vernier scale such that the vernier scale slides over the main scale.

How can a vernier caliper measure depth?

Depth can be measured by inserting the depth rod into the hole you are measuring. When you adjust the jaws using the thumb screw, the rod will protrude from the end of the caliper.

What is the part of vernier calipers that can be used to measure the depth of an object *?

Depth Rod: The depth rod is another useful feature of the vernier caliper which can be used to measure the depths of holes or steps. The depth rod is a thin rod located at the end of the main scale.

How do you measure the diameter of a beaker using a vernier caliper?

Keep the edge of the main scale of vernier callipers on its peripheral edge. This should be done in such a way that the tip of the strip is able to go freely inside the beaker along its depth. Keep sliding the moving jaw of the vernier callipers until the strip just touches the bottom of the beaker.

What are the parts of vernier caliper?

A Vernier Caliper has following parts:

• Outside jaws: It used to measure the external dimension of objects.
• Inside jaws: It used to measure the Internal dimension of objects.
• Measuring Depth Probe: It is used to measure the depth of objects.
• Main Scale (cm).
• Main Scale (inch).
• Vernier Scale (cm).
• Vernier Scale (inch).

On which part of vernier calliper depth bar is attached?

The depth bar of vernier caliper is attached with – Fixed jaw. Moveable jaw. Vernier scale. Adjustment screw.

What is the parts of vernier caliper?

Parts of Vernier Caliper: Outside jaws: It used to measure the external dimension of objects. Inside jaws: It used to measure the Internal dimension of objects. Measuring Depth Probe: It is used to measure the depth of objects. Vernier Scale (inch).

How can use vernier caliper?

In simple words, it measures the straight linear distance between two points. A vernier caliper is also used to measure the diameter of round and cylindrical objects, by positioning the jaws of the caliper on either side of circumference. Vernier caliper is a very useful tool to carry in the toolbox.

Which part is the vernier scale of vernier caliper?

Vernier scale – It gives interpolated measurements in fractions of an inch. e.) Retainer – It is used to block movable parts to allow the easy transferring of a measurement. Therefore, we conclude that the lower jaw is the part of the Vernier calipers which is used to measure the thickness of a pencil.

Where do you measure the depth of a vernier caliper?

To measure the depth, find the total reading and zero correction. The edge of the main scale of vernier caliper should be placed on the peripheral edge. Care should be taken so as to make the strip go freely inside the beaker along its depth.

How to measure the depth of a vernier Beaker?

To measure the depth, find the total reading and zero correction. The edge of the main scale of vernier caliper should be placed on the peripheral edge. Care should be taken to make the strip go freely inside the beaker along with its depth.

What are the jaws of a vernier caliper used for?

The upper jaws of a caliper are used for taking inside measurements such as the diameter of a hole or slot. 2. Vernier caliper lower jaws. The lower jaws are used for measuring outside dimensions such as width, length, and diameter. 3. Vernier caliper depth rod. The depth rod is used for measuring the depth of holes.

How are internal diameter and depth of Beaker measured?

To Measure Internal Diameter And Depth Of A Given Beaker/Calorimeter Using Vernier calipers And Hence Find Its Volume Vernier caliper is a measuring device that has two scales: the main scale and vernier scale such that the vernier scale slides over the main scale.