Menu Close

How do you reset the service light on a 2006 Volkswagen Jetta?

Admin

How do you reset the service light on a 2006 Volkswagen Jetta?

Press and hold the 0,0 button (located to the right of the instrument cluster). Turn the ignition on (do not start the engine) and release the 0,0 button. Push and release the Clock Minute Set Button “min”. (located to the left of the instrument cluster).

How do you reset the maintenance light on a 2007 Volkswagen Jetta?

2019-2021 Model Years (MK7)

  1. With the ignition off press and hold the 0.0 button on the instrument cluster.
  2. Next, all you have to do is turn on the ignition with no start the car.
  3. When a confirmation message appears, release the 0.0 button.
  4. Next, press the 0.0 button again to confirm.

How do you reset the service light on a Volkswagen?

How to Reset Your VW Service Light by Model Year

  1. Turn your key into the on position.
  2. Select the Settings menu.
  3. Select the Service submenu.
  4. Select Reset option.
  5. Press OK.
  6. Press OK again to confirm.

When to reset the oil change light on a VW Jetta?

The Oil Change Light Reset Volkswagen Jetta 2008 2009 will need to be performed after every oil change. If it is not reset the system will be unable to properly track when your next oil change is due. Below is the Oil Change Light Reset procedure for the Volkswagen Jetta 2008 2009 .

How much oil does a Volkswagen Jetta hold?

The 2 Turbo liter engine holds approximately 4.9 quarts (4.6 liters) of 5W-40 oil when the engine oil and filter are changed. The 2 Diesel liter engine holds approximately 4.2 quarts (4 liters) of 5W-30 oil when the engine oil and filter are changed.

How do I reset the service due wrench light?

Turn the key into the ON position. Select the “Settings” menu with the controls located on either the windshield wiper arm or the steering wheel. Select the “Service” submenu and then select the “Reset” option and then press the OK button to reset the display. Press the OK button once more to confirm.

How do I reset the oil life monitor?

Follow the steps below to reset the oil life monitor after each oil change. With ignition off, press and hold the “0,0” button and turn the ignition to the “RUN” position. Release button. Press the clock minute set button “MIN”. Turn the ignition off.