What is the minimum depth for a washer and dryer?

What is the minimum depth for a washer and dryer?

Minimum space is 40 inches deep and 32 inches wide for a washer and dryer. A side-by-side washer and dryer needs at least 40 and 56 inches of space.

Does washing machine depth include pipes?

You can never be totally sure the measurements quoted in the specs would include the space that the hoses take up. Normally the measurements of a washing machine’s depth should include the whole area the washing machine will take up including the lid (which may or may not overhang at the back).

How deep are stackable washer and dryers?

32-inches
The scale of a full dimension stackable washer and dryer is approximately 27-inches in huge, seventy six-inches in high, and 32-inches deep. However, stackable compact washer dryers are approximately 24-inches broad, sixty seven-inches high, and 25-inches deep.

How thick is a flat washer?

Standard Round Washers in 304 Stainless Steel

Flat Washer Sizes	Inner Diameter (ID)	Washer Thickness
7/16″	0.500″	0.062″
1/2″	0.531″	0.062″
9/16″	0.625″	0.078″
5/8″	0.687″	0.078″

How much clearance do you need behind a washing machine?

You want to be sure the doors will clear any walls or door jambs. Behind: Add in about 6 inches for venting space and hoses. On the sides: Help minimize noise by leaving about 1 inch of space on each side of your washer and dryer.

How much clearance is needed for a washer and dryer?

On top of the physical space a washer or dryer takes up, it needs additional space called clearance. It’s recommended that there’s at least one inch of space around a washer or dryer to allow for proper air circulation. This space also helps minimize noise transfer.

What does closet depth washer mean?

This configuration—which Whirlpool calls “closet-depth”—gives you about two extra inches of wiggle room over standard Whirlpool front loaders, which tend to be a little under 33.5 inches. The closet-depth machines also require an inch and a quarter less clearance for the door to open fully.

Are washing machines a standard depth?

Washing machines come in standard height (85cm) and width (60cm) measurements, it’s just depth that can change depending on size of the drum. The standard depth of a washing machine is around 60cm, but some machines have depths between 40 and 50cm for smaller spaces.

How much space should be between washer and wall?

We recommend at least 25 mm (1 inch) of clearance on all sides, 150 mm (5.9 inches) of clearance at the back, 50 mm (2 inch) of clearance at the front and 432 mm (or 17 inches) at the top. Remember that when it comes to clearance around the washer, more clearance is better than less.

What is the average size of a washer?

Washer and Dryer Sizes. The average width of a washer and dryer is 27 inches. If you’re planning on putting the two side by side, this requires a 54-inch space at the very minimum. The height of a washer or dryer typically ranges from 38 to 43 inches, while the depth varies between 28 and 34 inches.

What is the standard height of a front load washer?

Washers vary between 25 and 28 inches in depth, while dryers can be between 25 and 32 inches deep. Top loading machines are typically around 36 inches in height, while front loaders have more variance–usually between 34 and 39 inches.

What are the standard dimensions of a washer and dryer?

Standard Washer and Dryer Dimensions Standard Washer and Dryer Dimensions. Front-loading and top-loading washing machines and dryers are about 27 inches wide by 35-43 inches high and 28-34 inches deep (without pedestals). Compact Washer and Dryer Dimensions. Stackable Washer and Dryer Dimensions. Tips for Finding the Right Washer and Dryer.

What is the standard height of a dryer outlet?

Electrical hookups for washers and dryers should be placed within 6 feet of the unit. While a minimum height for outlets in a home may very, depending on local building codes, for convenience both outlets should be placed between 34 and 36 inches high.