Table of Contents
What does IG mean on fuse box?
IG = ignition. ie power with the key in RUN (second position)
What is ACG in Honda?
The AC generator-equipped Idling Stop System features quiet starts. Honda developed an ACG (AC generator) starter-type Idling Stop System for the PCX—a first for a 125cc-class motorcycle and scooter*—in order to deliver comfortable operation even as Idling Stop is put to work frequently in city driving.
What does P W Dr mean?
Front passenger’s window motor. 11. (P/W DR) 20.
What does LAF fuse mean?
What is the LAF fuse? I am not sure if you mis read something in the fuse box or not, but if you were missing the LAF sensor fuse you would have a check engine light on. The LAF is basically sensor that determines the oxygen content in the exhaust.
What is the SRS fuse?
In most models, this is fuse #40, located in the lower right corner of the fuse block. The SRS light is a warning light for your supplemental restraint system (airbags). An SRS light means that there is a problem in the system.
What does PWDR stand for?
| PWDR | Powder Medical » Laboratory |
|---|---|
| PWDR | Partial Wave Dispersing Relation Miscellaneous » Unclassified |
| PWDR | Preliminary Weapon Development Report Community » Development |
| PWDR | Programme wallon de Développement Rural Miscellaneous » Unclassified |
| PWDR | Protocol for Web Description Resources Miscellaneous » Unclassified |
How do you test a fuse on a Toyota?
If you can get to both sides of the fuse, see if you have power on each side. If you want to make sure, remove the battery terminal, and use an ohmmeter to measure the resistance between the battery terminal and the other side of the fuse. Should be zero or close to it.
How can you tell the voltage of a fuse?
If good it will read battery voltage on both sides. Most fuses have exposed metal tabs on both sides of the actual fuse section for this purpose. On the fuses shown check for voltage at the small legs near the side of the case in the lower section of the picture. If you can get to both sides of the fuse, see if you have power on each side.
How do you remove fuses from a car?
To remove the fuses take the 3 bolts on the side out that hold the black cables to the fuse box, the loosen with a thin flathead on the front part of the fuse and lift. They come right out. Thanks for contributing an answer to Motor Vehicle Maintenance & Repair Stack Exchange!