Table of Contents
Why is my new toner not working?
If your toner cartridges aren’t installed correctly, it can prevent your printer from functioning properly. Diagnosis: A toner cartridge is ajar, stuck inside the printer, or otherwise improperly inserted. The most likely fix for this problem is to take the cartridge out. If it’s empty, replace it with a new cartridge.
Why does replace toner continue to appear on the LCD after I replaced the toner?
This means a new cartridge was installed and the Replace Toner message cleared. Then, after printing some pages, Replace Toner re-appeared on the display.
Why is my Ricoh printer not printing?
Printing does not start. The interface cable is not connected correctly. If the machine is using wireless LAN, failure to print might result from a weak wireless signal. In [System Settings], under [Interface Settings], select [Wireless LAN], and then press [Wireless LAN Signal] to check signal status.
How do I reset my Brother printer after changing toner?
- Power on the Brother printer.
- Open the toner access door located at the front of the printer.
- Press the “Clear/Back” button.
- Scroll through the list of toner cartridges until you have located the one that is giving the “Replace Toner” message.
- Press the “1” button to reset the toner cartridge display.
Why does my toner keep saying replace toner?
Our standard toner cartridges are manufactured with a reset lever that moves when installed into the machine and triggers a notification that a new cartridge has been inserted. This mechanically triggers the machine to reset the Replace Toner message. i.
Do you have to install a new toner cartridge?
Verify you are using a NEW Brother toner cartridge. When replacing the toner cartridge, you MUST install a brand new, unused genuine Brother toner cartridge in order to reset the toner status. Swapping toner cartridges from one machine to another or installing a partially used toner cartridge may cause this issue.
What kind of toner should I use to replace brother toner?
A brand new, out-of-the box standard Brother toner (TN210) should be installed to clear the Replace Toner message. Do NOT install a Starter toner or a previously installed or used toner cartridge as a replacement toner.
How do you redistribute toner in a drum machine?
Gently rock the toner cartridge from side to side five or six times to evenly distribute the toner inside the cartridge. Redistributing the toner may clear the message when the drum and toner assembly is reinstalled into the machine.