Table of Contents
What socket do you use to remove a spark plug?
Use a spark plug socket paired with a 3/8 ratchet to loosen and pull the first plug from its housing. These sockets are designed to securely grip the spark plugs for effortless removal and may require a socket adapter to use with your current drive tool.
Can you remove a spark plug with a socket?
4Stick the square end of your ratchet handle into the square hole in the spark plug socket. 5Loosen the spark plug by turning it counterclockwise. 6When the ratchet turns freely, finish the job by removing the ratchet handle and turning the socket by hand until the plug is free from the engine.
What size socket is a spark plug socket?
Most spark plugs require a 5/8″ (16mm) size spark plug socket. This refers to the size of the flats on the spark plug that are in contact with the socket. This spark plug requires the 5/8″ spark plug socket, which will probably fit a 3/8 ratchet extension.
What size socket is a spark plug?
How do you change the spark plugs on a KTM 250 SX F?
KTM 250 SX-F Spark Plug Instal Slide the spark plug down the spark plug tube with your finger so it doesn’t smash into the head. Reinsert the extension and spark plug socket and hand tighten it. Once it’s a hand tightened, use the wrench and give it a quarter turn more.
How many spark plugs does a Duke 250 have?
The only difference is that the engine in the Dominar uses twin spark-plugs while the KTM gets a single spark-plug. The KTMs are known for their raw power delivery and as we can see KTM 250 Duke makes 30 hp and revs up to 9,000 rpm .
How do you socket a spark plug?
- Step 1: Open Hood and Locate Spark Plugs. Open the hood of your car and secure it with the rod if need be.
- Step 2: Remove Spark Plug Wires.
- Step 3: Find the Right Socket Size.
- Step 4: Attach Socket to Wrench.
- Step 5: Loosen and Remove Plug.
- Step 6: Clean and/or Replace Plug.