Menu Close

How do I reset my Scientific Atlanta cable box?

Admin

How do I reset my Scientific Atlanta cable box?

Scientific Atlanta brand cable boxes, for example, can be reset by holding down the “volume up,” “volume down” and “info” buttons simultaneously until the box shuts down.

How do I reset my Scientific Atlanta Explorer 8300HD?

How to Reset an Explorer 8300HD Cable Box

  1. Press and hold the “Volume Up” and “Volume Down” buttons on the front of the unit.
  2. Press the “Info” button.
  3. Release the buttons when the HD8300 begins to reboot.

Why will my cable box not reboot?

Check along the front side of your cable box for a small circular button labeled Reset. If you don’t see the button on the front side of your cable box, then check on the back panel near the power cords. If you can’t find a Reset button on your cable box, then it may reset by holding down the Power button instead.

How do you set up a Scientific Atlanta cable box?

Setting up the box involves making wiring connections.

  1. Place the Scientific Atlanta box in a location that is close to the electrical outlets and on a stable surface.
  2. Turn the television and Scientific Atlanta box off at the “Power” switches and swing the box around so you can see the back.

How do I reset my Cisco Explorer 8642hdc?

Press stop 3 times on the remote and it will reboot [the “LED” circle going around, or “boot” appears].

What is the code for a Cisco cable box?

Enter one of the programming code from the list 0498 0497 0506 0535 0512 0466 for your CISCO Cable device.

How do I set up my optimum cable box?

Connect one end of the coaxial cable to the “Cable out” port on the back of the cable box and the other end to the “VHF/UHF” or “Antenna in” port on the back of your TV. Plug the power cord into the back of the cable box and then plug the other end into an electrical outlet. Plug in your TV and turn it on.

How do I reset my Cisco cable box?

How do you reset a Cisco junction box?

  1. Disconnect power from the junction box by pulling it out of the socket or the back of the box.
  2. Wait 30 seconds.
  3. Reconnect the power cord to the cable box.
  4. Wait 3 to 5 minutes for the box to reset.
  5. Turn on the TV and the decoder.

How long does it take for cable box to reset?

In most cases, your TV Box should reset in 15 minutes. In some cases, the program guide or other services may take 45 minutes before they are available.