What is an elcometer used for?

What is an elcometer used for?

The Elcometer 500 coating thickness gauge accurately measures the thickness of coating on concrete and other substrates, non destructively.

How can you tell the thickness of paint?

Dry film thickness (DFT) can be measured using two methods: destructive thickness measurement, where the coating is cut to the substrate using a cutter; and non-destructive coating thickness measurement, using techniques which do not damage the coating or the substrate such as magnetic, magnetic induction and eddy …

How does a DFT gauge work?

How it works- a permanent magnet is placed against a painted ferrous metal surface. Then spring tension is gradually increased until the magnet is pulled off. At that point a scale is read to indicate paint thickness. The magnet requires more force to pull off from thin paint than is required for thicker paint.

How does paint thickness tester work?

The paint thickness gauge has a sensor that sticks out of the bottom of the device, or is connected via a wire with the device. This sensor is than put on the surface of the panel you want to measure. The device will then measure the distance between the body panel underneath the paint, en the sensor.

How do you use an elcometer?

To take a reading, connect your probe, switch on the gauge and place the probe on the surface. You will immediately see the power of the Elcometer 456. Integral gauges even switch themselves on!

What is DFT paint?

Dry film thickness (DFT) is the thickness of a coating as measured above the substrate. This can consist of a single layer or multiple layers. DFT is measured for cured coatings (after the coating dries). The thickness of a coating depends on the application and type of process employed.

What is an elcometer paint meter?

The new Elcometer 311 Automotive Paint Meter is the fastest automotive paint gauge on the market today, used to instantly measure paint thickness and provide an indication of the overall condition of paint work.

What does DFT mean in painting?

Dry film thickness
Dry film thickness (DFT) or coating thickness is arguably the single most important measurement made during the application and inspection of protective coatings. Coatings are designed to perform their intended function when applied within the DFT range as specified by the manufacturer.

What’s the difference between primer and regular paint?

Even though they both seem similar, they have different purposes. Primer contains resins that seal to most surfaces, even porous ones, and provides a bond. This enables you to paint surfaces that would not adhere with regular paint. Paint on the other hand has what they call “pigments” which provides color and also durability to fight the elements.

Can you use Primer as a finish coat?

Yes, if the surface is smooth (non porous) and will allow the paint to adhere easily. Can primer be used as the finish coat of paint? My opinion is simply No. This doesn’t mean you have to apply paint over it, but you do need to seal it in some form or fashion.

When to apply 2 in 1 paint and primer?

Once the primer has dried completely, you can apply the topcoat. If you’re painting over a previous paint color, opting for the right 2 in 1 paint and primer product can help you achieve a uniform, beautiful, highly durable paint job in one easy step. Jason Parker is the owner of Performance Painting Contractors.

What happens if you put paint on an unprimed surface?

If the paint is applied to an unprimed surface, it may crack, peel, or chalk off within few months. For paint to last long, priming the surface with the right primer is imperative. After knowing the difference between primer and paint, one should choose the products wisely.