Why does my DVD player have sound but no picture?

Why does my DVD player have sound but no picture?

Make sure the DVD player and TV use the same video siginal. Check the settings of both the DVD player and the TV, make sure they play the same type of video signal, i.e., progressive or interlaced. Some TVs won’t play progressive signals and therefore you should make sure the player (DVD) is not in Progressive Mode.

Why won’t my DVD player read my DVD?

Use a soft cloth to clean the disc ; the disc may have fingerprints or smudges. Examine the disc for any cracks or scratches that might be interfering with playback. Make sure the disc playback is not restricted by parental control options. Make sure the DVD disc is compatible with the player.

How do you fix a DVD that is not reading?

Remove the disc from the DVD player. Use a lint-free cloth and some denatured alcohol or water to clean the disc and remove any dust or smudges that may prevent the player from reading it properly. Reinsert the disc into the player and press “Play” to see if cleaning the disc fixes the “NO DISC” error.

Why does my DVD player keep going black?

Turn off all the devices in the system (TV, Blu-ray Disc player, etc.) and try disconnecting and firmly reconnecting all the cables. If the issue is still not resolved, try lowering the output resolution: On the front of the Blu-ray Disc player, press and hold the STOP button for just over 10 seconds.

Why does my Blu-Ray player have no picture?

There’s No Picture from a Blu-ray Disc Player and the TV Screen Is Completely Black or Flashes. This may be an indication that there is a loose connection or an incorrect setting.

How do I connect my DVD player to my HDMI TV?

Step 1: Plug the HDMI cable into the Blu-ray or DVD player. Step 2: Plug the opposite end of the HDMI cable into the HDMI port on your TV. Step 3: That’s it! Make sure to select the correct input on your TV to connect with your player.

Why does my DVD say no disc when I insert it?

When the message NO DISC, DISC ERROR, or INSERT DISC appears on the display on the DVD player, check the following: Make sure there is a disc in the player. Make sure the disc is inserted correctly with the playback side facing down on the disc tray. Make sure the disc being used is supported by the player.

Why does my Blu-Ray player go black?

Why is my Blu-Ray player not showing picture?

Verify that the HDMI cable is securely connected to both the TV and the Blu-ray Disc player. Make sure the TV is set to the proper input. Press the Input button repeatedly until the correct HDMI input is displayed on the TV. Be sure to check which input on the TV you are connecting to.

What should I do if my DVD player won’t play?

Use a soft cloth to clean the disc ; the disc may have fingerprints or smudges. Examine the disc for any cracks or scratches that might be interfering with playback. Make sure the disc playback is not restricted by parental control options. Make sure the DVD disc is compatible with the player.

Is the DVD player compatible with the TV?

Make sure the DVD disc is compatible with the player. Make sure the DVD region code and format of the discs are compatible with the player. Turn off Progressive mode on the DVD player when connecting it to a TV which does not support Progressive mode.

Can a rewriteable DVD play on any DVD player?

Rewriteable ( DVD-RW) discs recorded in the Video Recording (VR) format using a DVD camcorder or DVD recorder may not play on all DVD players. DVD-RW discs recorded in the VR format will only play on DVD players that are VR compatible. Check the instructions manual of the DVD player for compatibility information.

Why does my DVD player not make a sound?

The CD drive makes a sound when spinning the DVD. If there is no sound then it means it is broken and replacement is necessary. The DVD player is not turning on or is on for a short period of time.