Table of Contents
How do I update SPYPOINT app?
Open the SPYPOINT app > Select the Cameras tab > go the Status page. Then check the Firmware Version under Device Information section. Go to the Support Page > All about my Device > select your camera model from the dropdown list > and scroll down to Firmware Update section.
Will SPYPOINT work with 25% signal?
Note that the signal strength can differ depending on the location and the cellular tower your SPYPOINT device is connecting to. 25% or 1/5 bars of signal strength is likely to cause photo transmission issues.
Why did my SPYPOINT stopped sending pictures?
When your device suddenly stops sending photos, it is important to check if your device is still communicating, as the troubleshooting steps are a little different. Verify the Last Communication by logging into your app > Cameras tab > Status > Last Communication. Take note of the last communication date and time.
What carrier does Spypoint use?
The LINK-MICRO-LTE takes advantage of the LTE cellular network for improved camera reliability and longevity….More videos on YouTube.
| CELLULAR/WIRELESS | |
|---|---|
| Camera fully configurable | via the SPYPOINT App |
Can you track a Spypoint camera?
And each camera has its own number. If stolen there is a button you can press on the app to report that camera stolen. They can track it down if it’s has batteries.
What cell carrier does SPYPOINT use?
The LINK-MICRO-LTE from SPYPOINT pairs the most popular cellular trail camera in years with the ultra-reliable LTE cellular network.
What cell service does SPYPOINT Cell Link use?
Verizon wireless network
Convert any trail camera with a standard SD card slot to a cellular cam with the Spypoint Cell-Link Trail Camera Cellular Adapter. The Cell-Link simply plugs into a cam’s memory card slot and then transmits its photos to your phone, using the Verizon wireless network.
Can you downgrade hikvision firmware?
We can downgrade from 5.4. 0 back to 5.2.
How do I update HIK firmware?
On the bottom of the page under Remote Upgrade, press the Browse button to locate and choose the firmware file, which was previously saved on the Desktop. After selecting the file, click Open, then click Upgrade. The camera will display a prompt that a reboot is necessary to complete the upgrade. Click OK.
How many cameras are on the Spypoint plan?
How many cameras can I run on one data plan? A data plan is only valid for one camera at a time.
Can you track a SPYPOINT camera?