What tools do you need to change a hub bearing?
The hub is bolted to the steering knuckle from the inside, usually with 3 bolts. What tools do I need to replace a wheel bearing? Needle-nose pliers, a ratchet wrench with various sized sockets, flat-head screwdriver, jack and a star wrench for loosening nuts on the wheel.
Do I need to replace the hub assembly or just the bearing?
Your wheel bearing may have been damaged slightly in the past and has now worn to the point it is starting to make noise. Your mechanic is correct in that the only repair for the bearing is to replace the hub. It is a sealed unit and cannot be disassembled without destroying it.
Can you replace a wheel bearing without replacing the hub?
If your car or truck has a non-serviceable wheel hub assembly with press in bearings, you will need a shop press to remove and replace the bearings. If your car or truck has non-serviceable wheel hubs, simply remove the old wheel hub and replace it with a new part.
Can you change a wheel bearing yourself?
Changing your own wheel bearings is considered an intermediate job that can be done at home, but will need some speciality mechanic tools. Be sure to obtain your vehicle’s service manual and identify the type of wheel bearing your vehicle is equipped with before you begin the repair.
How long does it take to replace a front wheel bearing hub assembly?
Experience is one of the key factors affecting installation time. For new technicians, turnaround time can be up to two hours. However, that time can be cut in half by experienced technicians, especially if there are no delays in acquiring parts or tools.
How long does it take to replace a wheel hub bearing?
How long does it take to replace Wheel Bearings? Replacing a single wheel bearing can take 90 to 120 minutes depending on the type of vehicle and complexity. There are a lot of moving parts that need to be maintained and properly sealed to complete this type of work.