Menu Close

How do you turn off the maintenance required light on a 1999 Honda Accord?

How do you turn off the maintenance required light on a 1999 Honda Accord?

1999 HONDA Accord Maintenance Light Reset Instructions

  1. Turn the ignition off.
  2. Press the select switch and reset switch at the same time, turn the ignition switch to run (one position before starting).
  3. Hold them for at least 10 seconds, until the indicator resets.

How do I reset my Honda maintenance?

This method should work on any Honda trim model that has a touch screen with a home screen.

  1. Press home.
  2. Select settings.
  3. Press vehicle settings.
  4. Scroll down to maintenance info and press it to select it.
  5. Press reset.
  6. A screen will pop up asking if you really want to reset it or cancel. press reset and that should do it.

What does the maintenance required light mean on a 1999 Honda Accord?

IT’S a maintenance reminder. Turn key off , press and hold ‘reset’ button in gauge area on right , turn key on (just to ‘run’ position , not start) continue to hold button in for at least ten seconds , the light should then go off (reset). boodam on March 01, 2014.

How do you turn off the maintenance required light on a 2001 Honda Accord?

To reset the maintenance light in a 2001 honda accord, put the key in the ignition to the on position with the engine off. Hold the reset button by the odometer for 10 seconds. You should see the maintenance light blink. Start the car after this and the light should be off.

How do you turn off the check engine light on a 2000 Honda Civic?

To reset the honda civic’s check engine light, insert your key into the ignition and turn it to the “on” position. Depress the reset button and select “yes” to clear.

How do you reset the oil light on a Honda?

Resetting Your Honda Oil Maintenance Light in 4 Steps

  1. Turn the ignition to run (one click before starting the engine).
  2. Press the Select/Reset button located on either your steering wheel or as a knob on your dash.
  3. Press and hold the Select/Reset button for 10 seconds.