Menu Close

Can I use 205 tires instead of 225?

Can I use 205 tires instead of 225?

You can certainly change your trailer tires to a narrower 205mm width as long as your wheels are 6- or 6-1/2-inches in width. These are the only size wheels that can take both 225mm and 205mm tire sizes.

Can you mix and match tire sizes?

Primarily, you should avoid mixing different tire brands and different tread patterns. There are rare exceptions for approved mixed-tire fittings, but in general, manufacturers do not recommend tire mixing at all.

What is the difference between a 205 tire and a 225 tire?

The 205 is 27.1 inches tall and the 225 is 28.4 inches tall. The 225 has higher capacities available for it as well. Generally people go to the bigger size when they need more capacity than what the 205 offers.

What happens if you put the wrong size tires on your car?

Effects of Wrong Size Tires Choosing too tall of a tire can result in a vehicle prone to rolling over, a dangerous concern for any driver. Tall tires may also rub against the inside of the wheel well. While not immediately problematic, this rubbing can lead to steering issues over time.

What happens if you put the wrong size tire on a car?

What happens when you mix tire sizes?

Mismatched wheels will fit each tire differently causing uneven wear and tear. In addition, different sized wheels can lead to different sized tires which can be detrimental to your vehicle. The best case scenario is to buy the same original equipment wheels that came on your vehicle.

Can you replace 2 tires instead of 4?

If two of your tires wear out faster, it may only be necessary to replace those two instead of replacing all four. If you do, it’s important to have the two new tires installed on the back and the partially worn tires moved to the front – even on front-wheel-drive vehicles.

What size tire is a 205?

The first three numbers (205) indicate the width of the tire tread in millimeters. 60 is the aspect ratio or profile of tire. This is indicated in percentage of the tire width. “R” stands for the construction method of the tire indicating the tire is a radial tire.