Table of Contents
Can the draw weight of a bow be adjusted?
To adjust the draw weight on a compound bow, take it to an archery shop. A bow technician will evenly tighten the limb bolts and check the draw weight. One full turn of the limb bolts usually changes its weight about two pounds. By increasing your draw weight just a few pounds at a time you’ll avoid injury.
Does a higher draw weight affect distance?
Heavier arrows will not travel as far because they will be pulled down by gravity, but they will be more accurate than lighter arrows and deliver a more penetrating impact to the target. The range of a heavier arrow will be less than that of a lighter arrow.
What draw weight should I get for a compound bow?
A Beginners Guide to Buying the Right Bow in 3 Simple Steps
| Archer Weight | Approx. Draw Weight (Compound Bow) |
|---|---|
| Medium-Frame Women (130-160 lbs.) | 30-40 lbs. |
| Larger-Frame Women (160+ lbs.) | 45-55 lbs. |
| Small-Frame Men (120-150 lbs.) | 45-55 lbs. |
| Medium-Frame Men (150-180 lbs.) | 55-65 lbs. |
What distance is a crossbow accurate?
As with most vertical bow hunters, effective range for a crossbow is about 40 yards. At this distance most hunters are able to fire a crossbow accurately enough to be lethal. Just like vertical bows, kinetic energy is the name of the game.
Will a bulletproof vest stop an arrow?
Kevlar vests CERTAINLY stop arrows! They are absolutely guaranteed to stop after penetrating no more than eight inches into a Kevlar vest. You can be absolutely assured that if you wear Kevlar to an Archery duel, the arrows will be unlikely to come out your back.
Is 50 lb draw weight hard?
As a rule of thumb, 40 pounds of kinetic energy efficiently kills whitetails, and 50 pounds or greater is required for larger game such as elk, moose or bear.
Are compound bows hard to pull back?
Compound bows are initially just as difficult to pull back as other bows; however, you’ll only have to pull against the full weight of the bow for a few moments, making it easier to hold for longer periods of time. A compound bow is much more complicated than other, more traditional kinds of bows.
Is it possible to lower the draw weight on a compound bow?
For many beginners using a 70 lbs. draw weight compound bow (like the ones used during IBO tests) is not possible. A beginner will likely go for a 55 or 60 lbs. version. That’s another 15-20 FPS reduction.
Can a 70 lbs bow have less punch?
In other words, it’s quite possible to have a bow with 70 lbs. draw weight that delivers less “punch” (kinetic energy) than a 60 lbs. bow or even a 50 lbs. bow. So how do you figure out the KE of your bow? There are two ways to do it on our site:
What should the FPS of a compound bow be?
This means that the actual FPS of your bow will be 320 – 67 = 253 FPS. Of course, things don’t need to be that bad. If you are using a 70 lbs. draw weight, your compound bow would have a 270 FPS. And if your draw length is indeed 30″ (as it is during IBO testing), this number would be closer to 290 FPS. And so on.
How is the speed of a bow determined?
Since the speed of a bow depends on many different factors (draw length, draw weight, arrow weight are the most important), it made sense to develop a set of common testing conditions. As such, all IBO tests are performed with: A 70 lbs. draw weight version of the bow.