Table of Contents
How big is a dining table that seats 10?
96 inches
To seat 10 people, with four on each side of the rectangle, the table must be 96 inches long.
How wide is a 10 person round table?
Circular Dining
| People 2 | Minimum Size 2′ 6″ (76cm) | Ideal Size 3′ (92cm) |
|---|---|---|
| 6 | 4′ 6″ (137cm) | 6′ (183cm) |
| 8 | 5′ (152cm) | 7′ (213cm) |
| 10 | 7′ (183cm) | 8′ (244cm) |
| 12 | 8′ (244cm) | 9′ (274cm) |
How long is a dining table that seats 12?
A 54” to 66” long rectangular table can seat up to 6 adults. A 72” – 84” long rectangular table can seat up to 10 adults, depending on table width. A 96” – 108” long rectangular table can seat up to 12 adults, depending on table width. A 120” long rectangular table can seat up to 14 adults, depending on table width.
How long is a table that seats 20?
So if you’re looking for a large rectangular table to seat 20, you can start by putting 2 folks on the ends of the table, then count 2 people each 2′ to seat the remaining 18 — or a total table length of 18′ (216″).
What is the standard size of a dining room table?
Most dining tables are made according to standard measurements. The standard width is 36-40 inches while standard height is 29-31 inches. The length varies depending on how many people the table sits.
How many people does a 6ft rectangular table seat?
How Many People Can Sit at a 6 Foot Table? If you have a 6 foot round table (72 inches), you can seat 8-10 people at the table. If it is a 30 inch by 72 inch rectangular table, 6-8 seats will fit around the table, with 3 chairs on either side and 1 chair at either end.
What is the length of a 10 person table?
Tables are typically 36 inches wide. If the chosen table is less than this, the end may not be wide enough for a setting, in which case the required length must adjusted. To seat 10 people, with four on each side of the rectangle, the table must be 96 inches long.
What are the dimensions of a 10 person Round Table?
Use our handy size chart to figure out what size you need! Below you’ll see sizes for standard Round Tables and Rectangular Tables. Typical size for 10-person table is 72″ Round Table. 1′ = 12″ / 1 foot = 12 inches.
What size table is needed for 8 people?
Use the rectangular table measurements for oval tables. A round table for eight people must be 192 inches in circumference — 24 inches times 8 — or 62 inches in diameter (circumference divided by pi, or 3.14, equals diameter).
What are the measurements of a table?
The height of a standard table is between 28 inches and 30 inches and a counter-height table is usually between 34 and 36 inches high. Some counter-height tables, known as bar tables, are even taller at between 40 and 42 inches high.