Menu Close

How do I change the time zone on my sharp atomic clock?

Admin

How do I change the time zone on my sharp atomic clock?

  1. Press the “RESET” button on the back of the clock.
  2. Set the time zone by pressing and releasing the “TIME” button on the clock. Press the “UP” button to cycle through the four available United States’ time zones.
  3. Hold down the “TIME” button until the year setting begins to flash.

How do I reset the time zone on my atomic clock?

Press and hold the ALARM button for 2 seconds to enter the alarm set mode. Press + or – to adjust, then press ALARM to confirm and move to next feature. ZONE / DST ON / OFF Press to select the current time zone: PST, MST, CST or EST. Hold the ZONE button for 2 seconds to switch from DST ON to DST OFF.

How do you set a sharp atomic clock model spc364?

* Hold the [SET] button for 2 seconds until the hour digit flashes, then release the [SET] button. * Press the [ADJUST] button to set the desired hour. * Press the [SET] button again. The minute digits will begin to flash.

How do I reset my sharp atomic clock?

The clock will automatically leave manual mode after the SET button is not pressed for 6+ seconds. If the clock does not respond to the various function modes, you can reset the clock by pressing the RESET button on the movement case.

How do I set the clock on my sharp Accu?

you can slide the mode switch to sec position, press (+) key to have the clock’s second hand move to 12:00 position. 5. slide the mode switch to set position, the hour digit will be flashing. press (+) key or (-) key to adjust the correct hours.

How do I set the time on my sharp Accu clock?

How to change the timezone on sharp atomic clock?

How to Change the Timezone on Sharp Atomic Clock Model Spc364 1 SNOOZE/LIGHT bar 2 LCD clock display 3 MODE button 4 SET button 5 ADJUST button 6 RECEIVE button 7 RESET button See More….

How do you set the time on a sharp spc900?

When the Sharp SPC900 is not able to receive a signal from the atomic clock, it is possible to temporarily set the clock’s time manually. To do so, one should press and hold the Time button on the back of the clock until the year digits appear, then use the Up and Down buttons to change its values.

How to set the atomic clock in Fort Collins?

(See Setting the Time Instructions.) After the first signal is received the clock will automatically seek out the atomic clock signal in Fort Collins, Colorado each evening at 2:00 AM and continue to do so each night. * In the Normal Time Display, press the [MODE] button to enter the Alarm Time Mode.

Is there a way to change the time zone?

To change the time zone you hit SET and then go thru each option until the time zone initials are flashing . Thne you can hit + and see which zone you want to try. There is no EDT for daylight savings. Very frustrating. Nancy Wallace The default time zone is PACIFIC.