Table of Contents
How do I change the toner on my Canon imagerunner advance?
Hold the left and right sides of the toner replacement cover, and pull the cover towards you to open it. The replacement cover (small cover) of the slot will open for the toner in need of replacement. Do not open the small cover by force, as doing so may damage the machine. Pull out the toner cartridge.
How do I change my Canon toner cartridge?
Replacing Toner Cartridges
- Open the front cover gently.
- Pull out the toner cartridge tray.
- Holding the toner cartridge that you want to replace by the handle, pull it straight up.
- Take the new toner cartridge out of the box.
- Take the toner cartridge out of the protective bag.
How do I clean my Canon imagerunner advance?
Clean the machine with a cloth dampened with a mild detergent mixed with water, and then wipe it clean with a soft, dry cloth. When cleaning the machine, first turn Off the main power switch, and disconnect the power cord. Failure to observe these steps may result in a fire or electrical shock.
How do I check the toner level on my Canon imagerunner advance?
Press [ ] (Status Monitor). Press [ ] or [ ] to highlight , and then press [OK]. Press [ ] or [ ] to highlight , and then press [OK]. The toner level is displayed.
How do I clean my Canon imagerunner?
Press (Settings/Registration). Press [Adjustment/Maintenance] → [Maintenance] → [Clean Inside Main Unit]. Press [Start]. When cleaning is complete, try printing again.
How do you replace toner in a canon IR 2200?
Open the side panel of your IR 2200, just above the paper trays. Pull the panel cover down to access the toner bottle. Grasp the end of the toner bottle and turn it toward the rear of the printer until it stops. Pull the toner bottle out of the inside of the printer. Shake the new toner bottle back…
What are the features of the canon ImageRunner 2200?
The imageRUNNER 2200 offers unsurpassed performance in standalone or networked environments. As a completely modular system, the 22-ppm imageRUNNER 2200 ships as a standalone digital copier with local scanning capabilities, and has the ability to add network printing, Super G3 faxing and network scanning.
How do you change toner in a Canon printer?
Pull the toner bottle out of the inside of the printer. Shake the new toner bottle back and forth a few times to distribute the toner in the bottle. Slide the bottle into the opening until it stops.
How do you replace a waste toner container?
1. Open the cover for the waste toner container. Back Left Side of the Main Unit 2. Pull out the waste toner container. 2. Attach the provided cover to the used waste toner container. 1. Remove the cover from the used waste toner container. 2. Cover the opening of the used waste toner container with the cover removed in step 1. CAUTION