Table of Contents
How do I fix E6 error on my dishwasher?
Fisher and Paykel Dishwasher Dishdrawer Error Code E6 = The first 4 program indicator lights are flashing. Error Code Cause: Flood switch activated. How To Fix: Turn the water and power off to the dishwasher and back on to try and reset. Check Flood Switch.
What does E6 mean on dishwasher?
An E6 error code of the Bosch dishwasher means that there are problems with the sensor that controls the water turbidity. It is also called the Aqua Sensor. In the dishwasher, this sensor detects the turbidity of the water due to the presence of small particles of dirt, food residues and other things inside it.
How do I reset my Fisher Paykel dishwasher?
Reset Procedures for the Fisher & Paykel Dishwasher
- Press the power button to turn off power to the Fisher & Paykel dishwasher.
- Wait a few minutes and then press the power button to restore power.
- Turn off and unplug the dishwasher if the issue remains.
- Wait five minutes and restore power to the unit.
Why is my DishDrawer not draining?
Straighten any kinks along the hose that drains water from your DishDrawer™. If the kinks return, you may need to replace the hose. Clean the filter plate/drain filter. Aim to clean your DishDrawer™ at least once per month, including the drain filter plates.
What does e6 mean on a Bosch washing machine?
end of
Fault Code 6 – Washing machine takes longer than 6 minutes to empty. This fault code indicates that water is unable to drain from the machine at the end of a cycle. Normally it will mean that you have a blockage or the drain pump is faulty.
Why does my Fisher Paykel dishwasher keep beeping?
The drainage hose may be blocked or kinked, or the connection to drainage pipe may be blocked. Ensure the drainage hose and connection to pipes are not blocked. once to stop the beeping, and then again to clear the fault. to resume the wash program.
How do I fix e30 error on dishwasher?
The error may be caused by the machine’s door seal leaking. Verify it by opening the door and examining the door seal. The seal should not be damaged, cracked or have holes. If the door seal is faulty, it must be replaced by a service engineer.
Why is my Fisher and Paykel dishwasher not working?
Ensure the dishwasher is plugged in and the power supply is turned on at the wall. Ensure the door is firmly closed. Ensure water is connected and turned on. Check the strainer and clean if necessary, it is located where the water inlet hose screws into the tap.