How do I put my Honda FourTrax in neutral?
Make sure you are rocking it back and forth while trying to shift it. To get it in neutral, keep shifting down until you see the green neutral light come on.
How do you get a stuck four wheeler out of gear?
If so just pull the front brake lever and start it. You also can use the manual shift tool to shift it down manually. You might have to rock the machine back and forth to get the gears to line up to shift all the way down (electric shift might work when doing this).
How do you shift a Honda ATV?
The convenience of push-button shifting with the rugged design of a conventional ATV transmission—that’s what you get with Honda’s exclusive Electric Shift Program (ESP). Just push one button to upshift and one button to downshift.
How do you fix a stuck four wheeler in reverse?
Try rocking the atv back and forth while pushing back on the rod or try hitting the bracket back with a hammer while rocking the atv. It might come out of gear without rocking back and forth. You can remove the air box and side panel to gain better access.
How do you start a quad gear?
Start off by being in neutral with the engine running. Pull in the clutch lever and hold it in. Now shift into 1st gear by pressing down on the shifter with your foot. To start accelerating, you need to give it some gas with the throttle while you slowly let out the clutch.
How do you change the gears on a Honda four wheeler?
Pull in the clutch lever and press the shifter down. This puts the ATV in first gear. Release the clutch lever slowly until you feel the “pull” of the engine, then pull the lever back in. Repeat until you are comfortable with the point of the lever release at which this “pull” happens.
How many gears does a Honda FourTrax 300 have?
Drivetrain – The Honda 300 FourTrax sends power to the ground via a five-speed transmission inclusive of a reverse gear and the extra-low first gear. It features an automatic clutch and a maintenance-free shaft drive.
How do you change gears on a four wheeler?