Table of Contents
How do I reset my Fisher and Paykel front load washer?
You can reset your washer to the settings it left the factory with:
- Enter Option Adjustment mode (refer to ‘Option Adjustment’).
- Select the ‘Delicate’ cycle.
- The display will show . Touch and hold for 3 seconds to reset your washer to its factory settings.
How do I drain my Fisher and Paykel washing machine?
How to Drain a Top-Loading Washing Machine
- STEP 1: Turn off the power. Switch the power button on the machine off, if your model has one.
- STEP 2: Locate the drain hose and water supply hoses.
- STEP 3: Drain the washing machine of water.
- STEP 4: Remove a drain hose clog.
- STEP 5: Remove a drain pump clog.
What does Error 37 mean on a Fisher and Paykel washing machine?
Err 37. Pump Filter is Blocked. Clean the pump filter. Follow the instructions in ‘Caring for your washer’ in your user guide. Ensure there are no foreign objects in the pump cavity, or obstructing the impeller at the rear of the cavity.
Can you reset a Fisher and Paykel washing machine?
Factory Reset Turn the dial to select ‘Spin’. Touch and hold the ‘Delay Start’ ‘More’ , the ‘Delay Start’ ‘Less’ and ‘Options’ buttons together for 3 seconds will appear on the screen and the machine will beep. Your washer will now be reset to the default settings.
How do I reset my Fisher and Paykel washing machine smart?
Factory Reset
- Turn the dial to select ‘Spin’.
- Touch and hold the ‘Delay Start’ ‘More’ , the ‘Delay Start’ ‘Less’ and ‘Options’ buttons together for 3 seconds will appear on the screen and the machine will beep.
- Your washer will now be reset to the default settings.
Why won’t my Fisher and Paykel washing machine drain?
Please check the spigot (s pipe) drain holes have been drilled and clear….Not Draining.
| Possible Cause | What to Do |
|---|---|
| Pump filter blocked | Clear the pump filter refer ‘Caring for your washer’ in your User Guide. Ensure the impellor located at the back of the pump filter cavity can move freely and isn’t obstructed. |
What does error 37 mean on a Fisher and Paykel washing machine?
What does Error 37 mean on a Fisher and Paykel washing machine? Disconnect power before attempting any appliance repair! Fisher Paykel uses an auxiliary drain pump to pump the washer water out. Often times debris will become lodged inside the drain pump causing the error code 37.
Why do I get a PF error code on my washing machine?
The PF error code indicates a power failure. This may occur if the power supply to the washer is interrupted during a cycle from power outage. Simply restart the washing cycle process. The tE error code indicates a heating error, usually caused by faulty thermistor. Unplug the washer for 10 seconds.
Why do I get a CE error code on my washing machine?
The CE error code indicates that there has been an over-current in the electrical circuit of the motor. It is caused by a short circuit, loose connection, ground fault or power surge. Unplug the washer for 10 seconds. Plug the washer back in and attempt to run a cycle.
What to do when your washing machine says DE1?
The error may look like dE1, del or dEL on your unit’s display. Unplug the washer for 10 seconds. Plug the washer back in, ensure that the door is completely closed, and restart the cycle. If the dE1 error code persists, close the water taps; and unplug the washer.