Menu Close

How do I turn on the jets in my hot tub?

How do I turn on the jets in my hot tub?

How to Turn Jets on in the Hot Tub

  1. Locate the control panel of the hot tub. This is typically near the hot tub entryway.
  2. Turn on the jets. You will see a speed (low, medium, high) that allows you to adjust the force of the hot tub jets.
  3. Turn on the timer as well.

What are the knobs on my Jacuzzi tub?

There there might be one or two knobs, those are used to regulate the amount of air, which in turn controls the amount of bubbles or the intensity of the jets. Some also have underwater disco lighting.

What is the difference between a Jacuzzi and a spa?

While the three terms are often used interchangeably, they aren’t the same. A hot tub is an umbrella term for any tub with heated water. Spas fall into this category, but spa is also another umbrella term that refers to water therapy, which includes Jacuzzis. Jacuzzis are a trademarked brand name.

What do Jacuzzi buttons do?

The jet button controls the amount of water flowing through the jets. This is more powerful than the blower button and depending on the model or size of your spa, you could have even two or three buttons controlling different jet sections within your hot tub.

What are the buttons on my hot tub?

Most spas that have a temperature control included in the top side panel will have two buttons, a temp up button and a temp down button. Having these controls right at your fingertips makes getting the ideal temperature setting in your spa as easy as the push of a button!

How do you turn off bathtub Jets?

If you have massage jets running with therapy pumps and the standard circulation jets you might have a button that says: Jets 1, Jets 2, and Jets 3. To toggle the pumps on and off, simply press the jets you would like turned off. That will switch off the therapy pump you indicated.

Why are my jets not working on my hot tub?

Jets Are Not Working Properly When jets start failing, the most likely case is that your hot tub pump is not working correctly. Clogged filters or water intakes can also cause jet issues. Clean them to enhance water flow. If you cannot clean the filter properly, you may need to replace.

How do you set the temperature on a Jacuzzi?

To adjust the thermostat, you simply press the button that increases or decreases the water’s temperature. Some hot tubs may use a mechanical thermostat to control the water temperature and you need access to the spa’s heater to adjust this thermostat.

What model Jacuzzi do I have?

The model and serial number is located in three places: On a label located on the back page of your Operating/Installation Instructions. (With the warranty information) On a white label located on the bath vessel near the pump/motor.