How do you clean a disgusting plastic bathtub?

How do you clean a disgusting plastic bathtub?

Ammonia cleaners will effectively clean all tubs and showers without damaging fiberglass. Many experts suggest a paste of dish soap and baking soda left for at least an hour on stubborn stains and rinsed with vinegar and hot water.

How do you clean an old plastic bathtub?

Plastic bathtubs are easy to clean, so you should first start your cleaning with a mild detergent, brush, and warm water. Pour some detergent into a container, and add a little bit of water. Dip the cloth in the container, and use it to wipe off the dirt on the tub. Use a brush to scrub away stubborn stains.

How do you remove black stains from a plastic bathtub?

For Red or Black Stains, Use Baking Soda and Hydrogen Peroxide. Use the brightening power of baking soda and hydrogen peroxide to remove tough red or black stains. Do not use this method on an acrylic tub—it may scratch the surface. Mix two parts baking soda and one part hydrogen peroxide to form a paste.

How do you get stains out of a plastic tub?

Make a solution of water and bleach, using one tablespoon of bleach per cup of water. Let the containers and other items soak in the solution for one or two hours. After the stains are gone, wash the containers thoroughly, rinse, and dry.

How do I get my plastic tub white again?

How to Whiten a Yellowed Plastic Tub Surround

1. Combine 1 teaspoon of liquid dishwashing detergent with 1 quart of water in a spray bottle.
2. Spray the tub surround with the cleaner.
3. Combine baking soda and water to create a paste similar in consistency to toothpaste.
4. Wet a soft nylon brush with warm water.

How do you clean a very dirty acrylic tub?

Baking soda can remove hard dirt from the acrylic. For tough stains: First, fill the tub with hot water and vinegar. Allow this soaking mixture to stay for 15 minutes or more to loosen any mildew and scum, then drain the water. Use a damp cloth or sponge to scrub the baking soda into the tub and faucets.

How do I get my plastic bath white again?

How do I get my plastic bath to shine again?

Overstock recommends mixing a solution of equal parts vinegar and water and using a spray bottle to apply it all over your plastic bathroom fitting. Vinegar may take time to cut through grease, so it can be left for several minutes before being wiped away.

Can you use bleach on a plastic bath?

Many acrylic tub manufacturers warn against using bleach or other abrasive cleaners as this “may void the warranty” on your bathtub. So, no matter what type of cleaner you prefer, make sure to use a soft cloth or a squeegee to avoid damaging your tub’s finish.

Can you make yellowed plastic white again?

Fill a bucket or large bowl with one part bleach and one part water. Fill it enough so that it will cover the yellowed pieces when they are submerged. If the items can be submerged, then put them into the bucket or bowl. Allow the items to soak until they return to the original white color.

How do you whiten a yellow plastic bathtub?

Hydrogen Peroxide: fill a spray bottle with 3-percent hydrogen peroxide. Let the solution sit for 10-15 minutes and then wipe the tub down with a damp sponge. You can repeat these steps until the yellow staining disappears.

What do you use to clean plastic tub surround?

Cleaning your plastic tub surround is a job you may not like, but it has to be done. You don’t need a commercial cleaner. All you need is to make an easy-to-apply mixture of toothpaste and baking soda. In less than 10 minutes, you will have your plastic tub surround clean and free of dirt and grime.

What’s the best way to clean your bathtub?

1 Mix dishwasher detergent and water into the bathtub or bucket. For tough stains, scrub the area with cream cleanser… 2 Use a cloth to scrub the tub and finish removing the stains. 3 Rinse multiple times and wipe completely to prevent streaks. More

How to clean a fiberglass bathtub at Home Depot?

Cleaning a Fiberglass Bathtub 1 Combine 2 parts vinegar and 1 part water in a spray bottle and spray the entire bathtub. Allow this soaking solution to sit in the tub for 15-20 minutes. 2 Use a cloth or sponge to remove the dissolved dirt and scum from the tub. 3 Rinse the tub and use a microfiber cloth to remove excess paste or solution.

How to clean acrylic tub with baking soda?

1 Scatter baking soda or mild cleaning product throughout the tub and allow it to sit for 5-10 minutes. Baking soda can remove hard dirt from the acrylic. 2 Use a damp cloth or sponge to scrub the baking soda into the tub and faucets. 3 Use a bristle brush to capture dirt in corners and along the bathtub edges. 4 Rinse the tub and wipe clean.