Menu Close

How do you program a Pontiac Grand Prix key fob?

Admin

How do you program a Pontiac Grand Prix key fob?

Put your key into the ignition, and turn to “ACC.” Turn the key on and off within a second. Open and close the driver’s door and listen for the chime that indicates you are in programming mode. Press and hold the LOCK and UNLOCK buttons for 14 seconds, listening for the chime. Wait 14 seconds for the second chime.

How do you program a door LOCK fob?

BLOG

  1. STEP 1-Turn on the ignition. You should sit in the driver’s seat with both the ignition key and the key fob with all doors closed.
  2. STEP 2-Press the lock button.
  3. STEP 3-Turn off the ignition.
  4. STEP 4-Repeat the process with other key fobs.
  5. STEP 5-Restart the process.

How do you reset fob key?

Press and hold the “Lock” button on the key in the ignition and on any additional fob remote car starters you may have. Turn the key to the “Off” position. Do this within ten seconds of turning the key to the “On” position for the fourth time. Remove the key from the ignition.

Can I reprogram keyless entry?

Like new keyless entry systems, used keyless entry systems can be programmed or reprogrammed in just minutes from the driver’s seat. Using your keyless remote and your ignition key, programming will have you ready to use this safety and convenience feature right away.

How do you program a Pontiac key?

How to Program a Pontiac Ignition Key

  1. Enter your car and insert your key into the ignition.
  2. Cycle the key in the ignition to the “On” position and leave it in that position for 10 minutes and 30 seconds.
  3. Cycle the key back “Off” within 45 seconds.

How do you program a key fob for a 2000 Pontiac Grand Prix?

2000 Pontiac Grand Prix Key Fob Remote Programming Instructions

  1. Remove the key from the ignition.
  2. Close all doors.
  3. Remove the “MALL PGM” fuse from the fuse panel.
  4. Insert the key into the ignition, and turn to the ACC position.
  5. Turn the key to OFF and then back to ACC within 1 second.
  6. Open and close any vehicle door.

What do you need to reprogram a key fob?

To program your keyless-entry remote, press and hold the “LOCK” and “UNLOCK” buttons on the key fob simultaneously until the locks cycle once more. This could take up to 30 seconds, so be patient. Once you hear the locks cycle, your key fob should be programmed to your GM.

How do you reset the anti theft system on a Pontiac Grand Prix?

The keyless entry remote and the ignition key are required to reset the anti-theft system.

  1. Exit the vehicle and stand next to the driver’s side front door.
  2. Press and hold the lock and unlock buttons on the keyless entry remote until the horn honks once and the lights flash briefly.