Menu Close

How do you reset the change oil light on a 2010 GMC Sierra?

Admin

How do you reset the change oil light on a 2010 GMC Sierra?

2007-2010

  1. Turn ignition switch to ON position with engine off.
  2. Press the MODE button until the DIC reads “Oil Life Left/Hold Set To Reset”
  3. Press and hold the SET button until the display reads “100 percent”
  4. You will hear 3 chimes and the “Change Engine Oil Soon” message will go off.

How do you reset the oil light on a 2012 GMC Sierra?

To reset the oil level warning or maintenance light in your 2012 gmc sierra vehicle, turn the ignition key to the “on” position and depress the gas pedal slowly three times. Release and start your vehicle and oil light should indicate a reset.

How do you reset the oil life on a 2011 GMC Yukon?

GMC Yukon Change Engine Oil Light Reset Procedures:

  1. Turn ignition switch to ON position with engine off.
  2. Fully depress and release the accelerator pedal 3 times within 5 seconds of turning key.
  3. Change Oil lamp will flash for 2-10 seconds while it resets.
  4. Once it stops flashing, the maintenance light reset is complete.

How do you reset the oil life on a 2013 GMC Sierra 1500?

So let’s do it.

  1. Turn the ignition key to the ON position. Don’t turn the motor just put your key to the accessory mode.
  2. Go to the OIL LIFE display.
  3. Press and hold the ✓ button.
  4. Turn the ignition off and start the engine to verify the indicator has been reset.

How do you reset the oil life on a GMC Yukon?

2015-2020 GMC Yukon Oil Reset

  1. Close all doors, gear to park position.
  2. Turn the ignition on. Don’t start the engine.
  3. Use the scroll button to navigate the INFO menu then press the CHECK button.
  4. Then scroll down to REMAINING OIL LIFE.
  5. While the REMAINING OIL LIFE is displayed.
  6. Turn Off the ignition.

How to reset the oil change light on a Sierra?

Oil Change Light Reset GMC Sierra 1500 2008 2009 2010 2011 2012 2013 Procedure With Driver Information Center (DIC) Turn the ignition to the “RUN” position. Display “OIL LIFE REMAINING” on the DIC. Press and hold the “SET/RESET” button for more than 5 seconds. Oil life will reset to 100%. Turn the ignition off.

When do I need to Reset my oil change light?

The Oil Change Light Reset GMC Sierra 1500 2008 2009 2010 2011 2012 2013 will need to be performed after every oil change. If it is not reset the system will be unable to properly track when your next oil change is due. Below is the procedure for the GMC Sierra 1500 2008 2009 2010 2011 2012 2013 .

What does the oil change light on a GMC Chevy mean?

The oil change light on your Chevy or GMC is meant to keep you on track with your vehicle’s scheduled maintenance. The oil change light is triggered when the vehicle has counted down the expected life of your oil to zero. If you’ve had your oil changed at an authorized dealer, the technician will reset the light as part of the service.

How do you reset the oil light on a Honda Accord?

While the oil life message is displayed, press and hold the Enter button on the Driver Information Center for one second. 3. The Driver Information Center will display a reset acknowledgement message. Turn the key to the off position. After you’ve reset the oil light, turn the key to the off position.