Menu Close

How do you reset the maintenance required light on a 2006 Toyota Camry?

Admin

How do you reset the maintenance required light on a 2006 Toyota Camry?

Quickly push and hold the odometer button on your dashboard, then turn your key to position two. Continue to hold the odometer button for about 10 seconds. The car maintenance required indicator light should start to flash, and you may hear a beeping. After that, the light should go out.

How do I turn off the maintenance required light on my Toyota Camry?

Push and hold the dashboard odometer button and turn the key to position two. Keep holding the odometer button until the maintenance light starts to flash. You might even hear beeping noises. The light should go out.

How do I reset my 2006 Toyota Camry?

Press and hold the same button you use to change your odometer reading. While holding the button, turn your key slightly so your vehicle is on and the dashboard lights display but you do not start your engine. The odometer should start blinking before displaying all zeros.

How do you reset the maintenance required light on a 2006 Toyota Tundra?

2005-2006

  1. With vehicle ignition switched to ON position, make sure odometer reading is shown, then turn the ignition switch to OFF position.
  2. While holding reset button, switch ignition to ON position.
  3. Continue to hold the reset button until the odometer displays “000000” and/or the MAINT REQD light goes off.

How do I turn off the maintenance required light on my Toyota?

How to Reset the Maintenance Required Light?

  1. Turn Your Vehicle on. Your key should be switched to the on position and look on your dashboard.
  2. Turn the Vehicle Off and Press the Trip Meter Reset Button.
  3. Turn the Vehicle Back on.
  4. Keep the Reset Button Pressed.
  5. Release the Reset Button.

How do I turn off the maintenance required light on my Toyota Tacoma?

To disable it all You have to do is start with the vehicle off. Press and hold the odometer reset button. Then turn the vehicle on and back off. After You turn it off release the reset button and You can start the vehicle like normal and the maintenance reminder light will be turned off on the dash.

How do you reset the maintenance required light on a Lexus?

Can I Reset the Lexus Maintenance Light?

  1. Turn the ignition on.
  2. Depending on your model, flip the odometer/trip display to “ODO” mode or “TRIP A” mode.
  3. Switch the ignition off.
  4. Hold down the “Trip Meter Reset” button while turning the ignition switch back on.
  5. The maintenance light should blink, go solid, and then turn off.