Table of Contents
How do you reset the oil life on a Chevy HHR?
Turn the key to IGNITION ON (no engine start). Fully press and release the accelerator pedal slowly three times within five seconds. Turn the key to OFF, then start the vehicle. If the light or message comes back on when you start the vehicle, the OIL LIFE SYSTEM has not reset.
Why won’t my change oil light go off after oil change?
If your oil light stays on even after changing your engine oil, you’re going to want to check the sensor first to rule out a malfunctioning sensor as the cause. The oil pump may not be circulating enough oil to keep the engine’s parts lubricated and functioning properly, which can in turn cause multiple engine issues.
How do you turn off the change oil light on a Chevy Silverado?
Within five seconds of turning the key, depress the accelerator fully to the floor three times. 3. Watch for the oil light to flash and turn off. If the oil change light does not turn off, turn the key to the off position and retry the process.
How do you reset the oil light on a 2007 Chevy Silverado Classic?
Turn the ignition on but don’t start the engine. Press the accelerator to the floor 3 times in 5 seconds. The oil light will flash and reset.
Why is my change oil soon light on?
The Change Engine Oil Soon message can appear on your driver information center (DIC). When the DIC displays this message, it means that your oil should be changed soon. When this happens, the oil should be changed as soon as possible, within the next 600 miles.
Why does change oil soon light come on?
Your vehicle is equipped with a computer system that indicates when to change the oil and filter. When the system determines the oil life is diminished, it will turn on the CHANGE ENGINE OIL SOON message. When this happens, the oil should be changed as soon as possible, within the next 600 miles.
How to reset oil change due light on Chevy HHR?
Reset Oil Change Due Light on Chevy HHR Procedure: 2006-2011. Turn ignition switch to ON position with engine off. Press the INFO and RESET buttons on the DIC at the same time to enter the personalization menu. Press the INFO button to scroll through the menus until you see “Oil-Life Reset”.
How do you turn off the oil change light?
The steps for turning off the oil change light for some Honda products, including the Accord, are as follows: Insert the key into the ignition, turning it without starting the engine. Locate the “select” stem near the speedometer and press it until you see the word “oil” or a wrench icon appear.
What kind of oil does a Chevrolet HHR use?
Most Chevrolets have the oil type printed on the oil cap – it will likely be 5W-20, 5W-30, 5W-40, 10W-30 or 10W-40. If it isn’t printed on the oil cap, check your owners manual for the exact type before adding new oil. We recommend wearing safety glasses whenever you are working under your HHR.
How to reset a GMC oil change light?
The following instructions cover the model year 2005, as well as older GMC products and Chevrolet vehicles without a vehicle information center (VIC). To reset the oil change light, follow these two steps: Slip behind the wheel and close all the doors. Insert the key in the ignition and turn the key to the accessory position.