Menu Close

How do you sew a convertible top?

How do you sew a convertible top?

  1. Step 1: Sew the Wound. Start sewing the tear.
  2. Step 2: Glue the Seam. Using your fabric adhesive or Gorilla Glue, glue the seam.
  3. Step 3: Apply the Canvas. Cut the marine canvas to the cover the tear.
  4. Step 4: Sew the Inside. Remove the tape and sew the inside of the canvas, if needed.

Can a convertible top be repaired?

If you have noticed that there is a hole in your vinyl convertible top, you can patch it fairly easy with a repair kit and a little knowhow. Here is an easy guide to fixing a hole in a vinyl convertible top. The first step in the process of repairing your vinyl convertible top is closely inspecting the damage.

How much does it cost to repair a convertible top?

There are many different factors that will affect the overall cost of a convertible top repair. As a general rule of thumb, you will spend anywhere from $500 to $1,000 on a convertible top repair.

Can you patch a cloth convertible top?

Repairing a convertible top is not as easy as stitches and patches. So that’s one of the reasons you see convertible tops with duct tape instead of patches — there just isn’t an adhesive that does the job well. So you’ll need to use something to seal your tear and hold the patch and that’s why people use stitching.

Is Scotchgard safe for convertible tops?

Can I use Scotchgard™ Auto Water Shield on my convertible top? We do not recommend it. Scotchgard™ Products comply with all applicable laws and regulations and are safe for their intended uses.

What’s the best way to patch a hole in the roof?

Place ladder in stable location, climb on to the roof and locate the hole. Use a pry bar to lift shingles off of the damaged area. Start with shingles above the hole and work downward. Pull out all nails with a claw hammer. Cut the tar paper in the damaged area with a utility knife.

What’s the best way to repair a convertible top?

Step 1: Clean the repair area with isopropyl alcohol to remove any dirt or body oils which may impact a good bond onto the convertible top. Step 2: Trim fraying edges with scissors. Step 3: Apply a piece of Tenacious Tape (included in the Soft Top Repair Kit) over the damaged area.

What should I do if my convertible roof has split?

Convertible roof repair: Replacing the plastic rear screen If the plastic rear screen of your convertible car can’t be polished back to good condition, or has become so worn it’s split, then replace it. One of the most popular soft-top cars in the UK is the Mazda MX-5.

How to repair a tear in a soft top?

Whether it’s a hole, tear or rip in a soft top or convertible top, the Aquaseal FD Soft Top Repair Kit will have you back on the road with just five easy steps. Step 1: Clean the repair area with isopropyl alcohol to remove any dirt or body oils which may impact a good bond onto the convertible top. Step 2: Trim fraying edges with scissors.