Table of Contents
How do you take the drawers out of a filing cabinet?
Don’t worry though, we’re here to help.
- So, how do you take drawers out of a filing cabinet?
- Remove the contents of drawers.
- Start top to bottom.
- Pull the drawer out as far as you can.
- Locate the clip/latch on both sides of the drawer.
- Gently remove the drawer and hold on tight.
- Push the runners back into the filing cabinet.
How do you remove a drawer from a lateral filing cabinet?
Remove one screw using a screwdriver, from the front of the runners on both sides of the drawer, located about 1 inch from the front of the runners. Depress a tab with your fingers on both sides above the screw holes. Lift the drawer up and out.
How do you remove steel case drawers?
Pull open the empty top drawer to its full length. With a flat-tip screwdriver, remove the screws on each side of the drawer body at the back that connect it to its suspensions. Use the screwdriver to pry the drawer body barbs from the suspensions, then lift the drawer out.
How do you remove a flat drawer?
Gently lift the drawer from the sides in order to pull it above the drawer wheels. When doing this operation, keep your hands below the drawer to support it. Shift the front of the drawer down in order to remove it safely.
How do you remove an interlock drawer?
Soft-Close Drawers
- Empty the drawer first. This makes the removal process easier.
- Pull the drawer open until it’s as far out as possible and the guides are fully extended.
- Check the drawer guides to see if there is a clip or locking lever.
- Continue pulling the drawer outward until it is completely off of the rails.
How do you pick a file cabinet lock with a paperclip?
Using Paper Clips Insert the curved tip of the paperclip into the keyhole of the lock. Make sure that you insert the paperclip vertically so that the curved end pushes down on the lock pins inside. Move the paper clip from left to right to find the right way to push down the pins and open the lock.