Menu Close

How many quarts of oil does a 911 Porsche take?

How many quarts of oil does a 911 Porsche take?

Engine Oil

Viscosity: 0W-40, 5W-40 (All TEMPS) SEOB2
Capacity: 8.5 quarts (with filter)After refill check oil level.
Torque: Oil Drain Plug…NS ft/lbsPlastic drain plug. Tighten by hand until plug locks and engages.

How do you change the oil on a 997?

Waiting until your engine is warm to the touch is usually a good temperature for oil draining.

  1. Step 1 – Elevate the rear of the car.
  2. Step 2 – Locate and unscrew the oil drain plug.
  3. Step 3 – Locate and loosen oil filter housing.
  4. Step 4 – Replace O-ring on oil filter housing and install new filter.

How many quarts of oil does a 996 Porsche take?

Fill your oil tank from the oil filler hole located in the rear engine compartment. Add about 8 quarts to the engine, and check the dipstick (1998-2005) or the oil level gauge (2005 and later). Continue to add about a half a quart at a time and keep checking the level.

What kind of oil does a Porsche 996 take?

5W-50 for 996 and 986 models (all derivatives) With high temperature resistance and very good shear stability, Porsche Classic Motoroil offers superb lubricating and protective properties in all operating conditions.

Where is the oil filter on a Porsche 911 Carrera?

The 911 Carrera filter is a cartridge-type filter, which is contained within a plastic oil filter housing next to the bottom sump underneath the car. You will typically need the factory oil filter housing removal tool, or a comparable one, in order to remove the housing.

What kind of oil does a Porsche 996 use?

– 996 Carrera 4S Coupe (2002-05) Contains 9 Liters of Porsche Classic 5W-50 Motor Oil, OEM Oil Filter, Drain Plug and Sealing Ring Oil capacity for the 3.4L 911 is 8.2 Liters, and 8.8 Liters for the 3.6L. $181.75 Performing your oil changes at regular intervals is an essential part of keeping your engine healthy.

Is there an oil filter removal socket wrench for a 996?

This oil filter removal socket wrench tool also features a 3/8-inch drive with a 27 mm hex, which is compatible with oil filter housings belonging to the Porsche 997, 996t, 996, 987, 986. This item is non-returnable and not covered under a warranty.

What do you need for an oil change on a Porsche?

Nothing is more frustrating than emptying your oil, only to find out that you don’t have a replacement filter or enough oil. You will need an oil filter, the special Porsche oil filter removal tool, a roll of paper towels, a very large oil pan or bucket, and approximately 7-10 quarts of oil.