Table of Contents
- 1 How much area does a ton of dirt cover?
- 2 How many tons of dirt Do I need calculator?
- 3 How many tons of dirt are in a dump truck?
- 4 How much will a ton of topsoil cover?
- 5 How do you calculate tons of topsoil?
- 6 How much does a ton of soil weigh?
- 7 How many square feet does 1 yard of dirt cover?
- 8 How big of an area do I need to add dirt?
- 9 How much does Yard 3 of topsoil weigh?
How much area does a ton of dirt cover?
As a general guide, 1 cubic yard of aggregate, sand, or dirt is equivalent to 1.5 tons….
| Coverage Chart | |
|---|---|
| 1″ Depth | 324 Sq. Ft. |
| 2″ Depth | 162 Sq. Ft. |
| 3″ Depth | 108 Sq. Ft. |
| 4″ Depth | 81 Sq. Ft. |
How many tons of dirt Do I need calculator?
Length in feet x Width in feet x Depth in feet (inches divided by 12). Take the total and divide by 21.6 (the amount of cubic feet in a ton). The final figure will be the estimated amount of tons required.
How far does a tonne of soil go?
Loose Topsoil As a general rule, a tonne of a standard topsoil equals approximately 0.67m3.
How many tons of dirt are in a dump truck?
Smaller dump trucks on pickup frames can have a weight limit as low as half a ton, whereas larger dump trucks can carry as much as 15 tons (30,000 pounds) of material. That’s quite the broad range!
How much will a ton of topsoil cover?
A tonne of condensed, moderately damp soil typically fills about 0.625 m3 (cubic meters).
How much does a ton of top soil cost?
Fill dirt costs $5 to $25 per yard or between $4 and $15 per ton delivered, depending on the type, volume ordered, and distance away….Fill Dirt Cost.
| Type | Per Ton | Per Yard |
|---|---|---|
| Septic Fill Dirt | $15 – $40 | $25 – $60 |
How do you calculate tons of topsoil?
Length in feet x width in feet x depth in feet. If you are looking to convert the total into tons, the you have to divide the total volume by 21.6, the number of cubic feet that fits in a ton.
How much does a ton of soil weigh?
How many yards of dirt will fit in a pickup truck?
| Dirt Type | Weight (lbs/cubic) |
|---|---|
| One ton | 2,000 pounds (1 cubic yard dirt load) |
| Half-ton | 1,000 pounds (half cubic yard dirt load) |
| ¾ ton | 1,500 pounds (3/4 yard of topsoil load) |
How big is a load of dirt?
Dirt is most often hauled by dump truck, so it depends on the truck as far as the amount goes. The average commercial dump truck can haul anywhere from 10 to 14 cubic yards of dirt. The actual price of the dirt can vary depending on the type.
How many square feet does 1 yard of dirt cover?
1 yard @ 2″ will cover 162 square feet 1 yard @ 3″ will cover 108 square feet 1 yard @ 4″ will cover 81 square feet 1 yard @ 5″ will cover 65 square feet
How big of an area do I need to add dirt?
Area to add dirt: 20 feet X 35 feet. You would like to add 5 ” of dirt. 20 X 35 = 700 square feet. 700 X .0154 ( from depth chart for 5″) = 10.78 or 11 cubic yards. How much will 1 yard cover? 1 yard @ 1″ will cover 322 square feet. 1 yard @ 2″ will cover 162 square feet. 1 yard @ 3″ will cover 108 square feet.
Is there a calculator for fill dirt?
Our fill calculator can help you figure out how much fill dirt you will need for your construction project. This cubic yard calculator works with top soil, mulch, gravel, dirt fill, clean fill, fill dirt.
How much does Yard 3 of topsoil weigh?
How much does a yard 3 of topsoil weigh? A cubic yard of typical topsoil weighs about 2700 pounds or 1.35 tons. A square yard of a garden with a depth of 1 foot (30.48 cm) weighs about 900 pounds (410 kg) or slightly less than half a ton. The water content of the soil is assumed to be that of a moderately damp (e.g. freshly dug).