Menu Close

How much horsepower can you get out of a 460 big block?

How much horsepower can you get out of a 460 big block?

But if you want to talk cast-iron overkill, perhaps we should speak of the Ford 429/460. Massive 3-inch main bearings and hefty iron heads combined at one time in the smog era to put out a measly 206 hp. Thank god those days are over.

How much horsepower does a 1969 460 have?

1000 rpm: 224.1 Nm / 165.3 lb-ft / 23.5 kW / 31.9 PS / 31.4 hp
3000 rpm: 676.6 Nm / 499 lb-ft / 212.6 kW / 289.1 PS / 284.8 hp
3100 rpm: 674.9 Nm / 497.7 lb-ft / 219.1 kW / 298 PS / 293.6 hp
3200 rpm: 672.4 Nm / 495.9 lb-ft / 225.3 kW / 306.4 PS / 301.9 hp
3300 rpm: 669.3 Nm / 493.6 lb-ft / 231.3 kW / 314.6 PS / 309.9 hp

How much HP does a 1978 Ford 460 have?

Using the new ‘SAE net’ horsepower rating the 460 coasted along around the 200 pony mark for much of the rest of the decade, with torque measured at just under 350 lb-ft. In 1978 Ford pulled the 460 from all of its passenger vehicles, Mercury and Lincoln included.

How much can a 460 pull?

For the Lexus family near the Oklahoma City, OK, area, the new Lexus GX 460 model comes equipped with the advanced 4.6L V8 engine that produces up to 310 horsepower and 329 lb-ft of torque. With this engine, the 2020 Lexus GX 460 can tow up to 6,500 lbs, no problem.

Is 460 hp fast?

The 2018 Ford Mustang GT Has 460 HP, Hits 60 MPH in Under 4.0 Seconds. When equipped with a 10-speed auto and the Performance Package, the new Mustang GT is seriously quick.

How much horsepower does a 1973 460 have?

212 HP @ 4400 rpm / 342 TQ @ 2800 dual exhaust 4 V carb.

How much horsepower does a 1977 Ford 460 have?

General Information. The Ford 460-cubic-inch, V8 engine has a cylinder bore of 4.36 inches and a crankshaft stroke of 3.85 inches. The output for 460 engines built before 1972 is 365 horsepower at 4,600 rpm and 485 pound-feet of torque at 2,800 rpm.

How much horsepower does a 429 have?

With a 4.36-inch bore and shorter 3.59-inch stroke than the 460, the 429-cu-in Cobra Jet promised at least 370 hp thanks to its snappy 11.3:1 compression ratio, and it became the go-to power plant for the late-’60s Fords.

How many miles will a 460 last?

However a 460 can last past 125k. Just make sure to keep it tuned regurally and use good oil. I’ve seen 454’s with over 150k still going strong. Big motors like the 460 weren’t meant to go 2-300k, but they can if properly cared for.

How many miles per gallon does a Ford 460 get?

What gas mileage does a 460 get? 14.3 mpg on the highway, 10-12 in town, anywhere from 7-12mpg while towing depending on load.

Is Ford 429 and 460 the same block?

Both the Ford 429- and 460-cubic-inch engines, members of the 385 family, fall into this category. Both came with the same block, so the only methods of positive identification involve locating the ID tag, measuring the stroke or verifying the crankshaft number. You cannot rely on decals or other visual items either, as they may be missing.

What is the firing order for a 460 engine?

firing order of a ford 460 engine is 1-5-4-2-6-3-7-8.1-2-3-4 is on the passenger side and 5-6-7-8 is on the driver’s side. The distributor rotates counter clockwise. According to my knowledge the ford big block series is offering the same order regardless of year or displacement. Hope it helps.

What is the weight of a long block Ford 460?

A 460-cubic-inch engine block is 34 inches long, 32 inches wide and 30 inches high. The dry weight without gas and oil is approximately 720 pounds. Ford 460 main bearing caps need to be tightened to 105 foot-pounds, while connecting rod bolts are tightened to 45 foot-pounds.

What years were the Ford 460 produced?

The Ford 460 cubic-inch engine is a big-block engine manufactured between 1968 and 1996. Best known as the engine that powered Starsky and Hutch’s “General Lee” Torino, the 460 was designed for large vehicles. Ford placed stickers on the valve covers identifying the engine as a 460.