Table of Contents
- 1 How much land do you need for an above ground pool?
- 2 How much land do you need to install a pool?
- 3 How do I measure my backyard for an above ground pool?
- 4 How far away should a pool be from a house?
- 5 How much is a 12×24 inground pool?
- 6 What is a good base for an above ground pool?
- 7 How big of a pool can I install in my small backyard?
- 8 How far does a swimming pool have to be from the House?
How much land do you need for an above ground pool?
Most above ground pools require an extra three feet of clearance on each side (or all the way around) to accommodate the supportive uprights. For example, an 18 food round swimming pool will require a total of 24 feet of space.
How much land do you need to install a pool?
As a general guide, the pool and the pool surrounds should occupy approximately 25% of the total outdoor area. This will allow space to create an entertaining area or a play area for the kids. You can use the additional space to position a shed, install a clothesline or build a veggie patch.
How do I measure my backyard for an above ground pool?
Just divide the pool’s diameter by two to get the radius, then add six inches for the frame. Put a stake in the center, and measure your string to that length. Tie the string to the stake, and walk it in a circle. Using the diagram below, stakes string, and some flour, mark out the pool area for your size pool.
How do you build a backyard above ground pool?
Proper preparation of your level foundation will yield many summers of fun in the sun.
- Choose the best area of your yard to set up your pool.
- Mark the perimeter of the pool area.
- Remove all sod and other vegetation from the area.
- Determine the lowest point of the pool area.
- Create a wood level.
Where should I put my above ground pool in my yard?
Above ground pools go best directly behind the house and close to it for convenience. Near a kitchen window for a birds eye view. Not under power lines, or near septic system.
How far away should a pool be from a house?
There is a national standard that requires that all swimming pools must be at least 10 feet away from the house walls. As mentioned, this will protect electrical wiring from leaks, floods, and splashes.
How much is a 12×24 inground pool?
12×24 Inground Pool Cost A 12-foot by 24-foot pool is considered medium-sized, and is suitable for swimming laps. The cost for this size, on average, will be between $26,000 and $38,000, depending on the type of material used.
What is a good base for an above ground pool?
Mason sand
Above ground pools require a base material to be laid for the construction of the pool. Mason sand or stone dust base material is used most often. Mason sand, also known as pool sand, will create a very smooth bottom layer and is the most popular choice.
How much water does an above ground pool need?
Above-ground pools typically require a lot of water. A cubic foot of water contains 7.5 gallons. A pool that is 6 feet deep, wide and long requires at least 1,600 gallons of water.
How to calculate the gallons in a swimming pool?
To figure out the amount of gallons in your pool use this calculator A good rule of thumb is you should be able to clear your swimming pool in an 8 hour period of time. Take the number of gallons and divide that by 8. Ideal Gallons Per Hour (GPH) = Gallons of pool water / 8
How big of a pool can I install in my small backyard?
The total amount of swimming pool that can fit into your backyard will depend greatly on the restrictions set forth by your neighborhood deed restrictions and the utility easement lines. In many cases there is always enough room to build an average size pool your family can enjoy.
How far does a swimming pool have to be from the House?
There is a national standard that requires that all swimming pools must be at least 10 feet away from the house walls. As mentioned, this will protect electrical wiring from leaks, floods, and splashes.