Table of Contents
- 1 How much torque does a 22RE have?
- 2 Are 22RE head bolts torque to yield?
- 3 Is a 22R and 22RE head the same?
- 4 How do I get more power out of my 22RE?
- 5 How can I get more power out of my 22R?
- 6 Is the 22RE a good motor?
- 7 What was the stroke of the Toyota 22RE?
- 8 What kind of compression ratio does Toyota 22R-E have?
- 9 When did the Toyota 22R E engine change?
How much torque does a 22RE have?
A stock 22RE engine puts out around 116 hp and 140 lb-ft of torque.
Are 22RE head bolts torque to yield?
They are not “Torque to Yield” bolts. The fact is Toyota typically under torques and you will probably do better with the already stretched bolts and keep a better head torque over the long haul.
Is a 22R and 22RE head the same?
Head design is totally different. 22re is shorter in height and fatter in width, 22r is is taller and skinnier. 22r is a cross head flow type of head, due to it bottom end high domed pistons.
Are all 22RE engines the same?
Mechanically they are the same. However, there are a lot of little differences (intake, throttle body, sensors, exhaust manifold, injectors, wiring harness, vacuum hoses valves). LC engineering has a lot of great info on their site. All Toyota 20R – 22R – 22RE engines use the same crankshaft and connecting rods.
How much power can a 22RE handle?
Lord Orange said: You can get 200HP out of a 22re.
How do I get more power out of my 22RE?
Top 6 22R/RE Proven Performance Upgrades
- Header. A header (exhaust manifold) is one of the best “bang for your buck” bolt-on performance upgrades for your 22R series engine.
- Cold Air Intake. A great compliment to a header upgrade is a cold air intake kit.
- Electric Fan Kit.
- Cylinder Head.
- Big Bore Throttle Body.
- Flywheel.
How can I get more power out of my 22R?
Is the 22RE a good motor?
The 22R and RE are by far the most reliable engines Toyota ever built, I had three pickups with both the 22R and RE engines and never had a problem. All of them had well over 200,000 miles on them. When I sold my 92, it had over 350,000 miles on it.
How do I get more power in my 22RE?
What are the torque specs for a Toyota 22R?
Torque Specifications of Rebuilt Toyota 22R Engines 1 Main Torque Specs. The main bolts have a torque of 76 lb.-feet and the cylinder head bolts have 62 lb.-feet of torque. 2 Crankshaft Torque Specs. The stock rod bolts have 46 lb.-feet of torque and the ARP rod bolts have 50 lb.-feet of torque. 3 Other Torque Specs.
What was the stroke of the Toyota 22RE?
The cylinder bore was measured at 3.62 inches with a stroke of 3.5 inches. The original 22RE was a cast iron engine. Another feature of this engine that helped with the durability was the use of soft piston rings.
What kind of compression ratio does Toyota 22R-E have?
The Toyota 22R-E has a cast-iron cylinder block with five bearing support system. It has a 92.0 mm (3.62 in) cylinder bore and 89.0 mm (3.5 in) piston stroke. Compression ratio rating is 9.0:1. Main bearing cap bolts tightening procedure and torque specs:
When did the Toyota 22R E engine change?
In 1985, the 22R engine was redesigned, many parts from the newer 22R-E (such as cylinder head, block, pistons, the timing chain, and cover, water and oil pumps) are not compatible with those from the older pre-1985 engine.