Menu Close

How often should a suction machine be serviced?

How often should a suction machine be serviced?

The suction machine should be serviced annually. 1.

How do you clean a suction tube?

Rinse the outside of the catheter and wipe off any debris. Use the suction machine to suction tap water through the catheter and rinse the soapy water out. Suction a small amount of hydrogen peroxide through the catheter, then place catheter in hydrogen peroxide and soak for approximately 20 minutes.

How long does a suction machine last?

2. Functional Life. In its technical bulletin TB MED 7, the Department of the Army pegs the lifespan of any medical “suction apparatus” at 10 years–but some devices can last twice as long. As with any other type of equipment purchase, high-quality machines generally have a much longer functional life.

How do you troubleshoot a suction machine?

LOW or NO pressure at end of Suction Tubing Connect Suction Tubing to Patient Port on Canister lid. Turn machine ON and feel for suction at open end of the Suction Tubing. If LOW or NO suction, throw out Suction Tubing and replace with new Suction Tubing. Recheck suction pressure.

How often should suction tubing be changed?

Yankauer and suction tubing should be changed when they become soiled or discoloured and are unable to be cleaned or if they split. Filters should be changed every 2 months. The canister should remain in place for the entire time the patient requires suctioning.

How do you dispose of suction canisters?

However, some solidifiers also contain a disinfectant that can render the suction canister contents sanitized. In that case, you can dispose of the canisters in the regular waste stream.

How many times can you suction a patient?

If suctioning more than once, allow the patient time to recover between suctioning attempts. During the procedure, monitor oxygen levels and heart rate to make sure the patient is tolerating the procedure well. Suctioning attempts should be limited to 10 seconds.

How often do you change a suction catheter?

Currently, the largest manufacturer of in-line suction catheter systems (Trach Care; Ballard Medical Products, Draper, UT) recommends routinely changing the catheter every 24 h.

How do you clean a suction machine?

Use a mild detergent or a mixture of bleach and water (1 part bleach/10 parts water) and rinse thoroughly. Follow the instruction manual when disinfecting the mechanics of the unit. Never submerge the suction unit. Use disinfectant wipes to clean all outer surfaces, including control knobs, screens and handles.

Can suction canister be reused?

These items should be changed out at least once every twenty-four hours or whenever it becomes visibly soiled. If the canister is reusable it should also be thoroughly washed along with the tubing according to the manufacturer’s instructions.