Table of Contents
What CC is 036 Stihl?
the 036 is also 61.5cc but has 4.5hp.
How old is a Stihl 036?
The 036 was made from 1991-2001. In 2002 they changed its name to the MS360, and that was made from 2002-2005. With a couple of changes, it became the MS361 and ran from 2005-2010. ….. The MS361 actually came out early 2003.
What size bar can a 036 run?
You can go to a 28 inch bar with skip chain on an 036, but the oil pump is not big enough to keep that size bar wet on a stock 036/360 or a 361/362. The bars will burn from lack of oil. I have seen that type of bar burn a lot around here, where many dealers sell 60cc Stihl saws with 28 inch bars on them, new.
What is the difference between Stihl 036 and 036 pro?
Gearhead. I believe the only differences are that the 036 Pro has a decompression valve port drilled and tapped for the decomp valve in the cylinder, of course with the valve installed. Also the Pro version has an adjustable oiler.
How many cc is a Stihl 038?
| MANUFACTURED BY: | STIHL ANDREAS MASCHINENFABRIK |
|---|---|
| ENGINE DISPLACEMENT: | 61ccm (3.72 cu. in.) |
| NUMBER OF CYLINDERS: | 1 |
| CYLINDER BORE: | 48mm (1.89 in.) |
| PISTON STROKE: | 34mm (1.34 in.) |
How many cc is a Stihl 039?
64.1cc
STIHL 039 64.1cc Petrol Chainsaw.
Is the 036 a good saw?
036 is a good strong saw.
Is the Stihl 036 a pro saw?
This is a consumer chainsaw you can use for trimming or cutting down trees or for maintenance work. …
What CC is a Stihl 039?
STIHL 039 64.1cc Petrol Chainsaw for sale online | eBay.
Is Stihl 038 a pro saw?
A 380 or 038 is a pro model saw.
How much is a 039 Stihl chainsaw worth?
Value is something determined by area. In my area a good clean, good running 039/390 with bar and chain will go for as much as $350.
What years was the Stihl 036 chainsaw made?
Stihl 036 pro manual. The Stihl 036 Pro saw was first manufactured in 1986 and was made until 2003, this Stihl 036 pro manual covers all 036 models.
How do you sharpen a Stihl chain saw?
How To Sharpen a Chainsaw With Electric Sharpener Step 1: Understand the specification of the saw blade. Step 2: Choose the right position for the sharpener. Step 3: Install the stone on the sharpener. Step 4: Adjust the swivel angle. Step 5: Adjust the blade teeth angle. Step 6: Adjusting the depth. Step 7: Begin the process.