Menu Close

What does 10 100 mean on a CB?

Admin

What does 10 100 mean on a CB?

Bathroom break
CB Radio 10 Codes

10-1 Receiving poorly (I can’t hear you)
10-45 All units within range please report
10-62 Unable to copy; please use phone
10-99 Mission completed
10-100 Bathroom break

What does 1010 on the side mean?

(“I’m 10-10 on the side.”) Denotes location, as in identifying one’s location (“My 20 is on Main Street and First”), asking the receiver what their current location or immediate destination is (“What’s your 20?”), or inquiring about the location of a third person (“Ok, people, I need a 20 on Little Timmy and fast”).

What does what’s your 1020 mean?

The phrase essentially means, “What is your location?” or “Identify your position,” but is a corrupted phrase from the original “10-20” used by law enforcement to verbally encode their radio transmissions so that non-police listeners would not easily discover police operations, as well as to communicate quicker and …

What does 10 4 mean on the CB?

What does 10-4 mean? Roger that! 10-4 is a way of saying “message received” in radio communications. It’s also used as a way to “you got it.”

What is a 10-100 security code?

10-100 Civil disturbance – Mutual aid standby.

What does a 10-100 mean?

The data speed of 10/100Mbps switch is rated for 10 or 100Mbps. When a network switch says “10/100”, it means that each port on the switch can support both 10Mbps and 100Mbps connection speeds, and will usually auto-switch depending on what’s plugged into it.

What does Rubber Duck mean in CB talk?

convoy
In trucker CB lingo, the “rubber duck” is the leader of the convoy and the most important person in that convoy.

What do truckers call police?

Trucker Slang and CB Radio Lingo

City Trucker’s City Nickname
Back Off The Hammer Slow Down
Back Out Driver Has Finished Talking
Bear Police Officer
Barefoot Using An Unmodified CB

What does 20 mean on CB?

What’s your location
What’s your 20? is CB (Citizens Band radio) lingo for “What’s your location?” What’s your 2020 can be part of a question about a person’s presidential aspirations for the 2020 election or about a person or organization’s goals or aims for the year 2020.

What are the 10 CB radio codes?

Here are some of the codes gonzotrucker.com has listed:

  • 10-1: Receiving Poorly.
  • 10-2: Receiving well.
  • 10-3: Stop transmitting.
  • 10-4: Ok, message received.
  • 10-5: Relay message.
  • 10-6: Busy, stand by.
  • 10-7: Out of service.
  • 10-8: In service.

What does a 10 100 mean?

What does a 10-5 mean?

Relay
10-5 = Relay this information to (name of a person, officer, etc.) The ceremony is typically conducted by the dispatcher issuing one last call to the officer, followed by a moment of silence.

What do the ten codes on a CB radio mean?

Ten-codes (sometimes called ten-signals) are numeric codes that represent common phrases used on the CB radio. Ten-codes allow the radio transmission to be concise and standarized. The codes below are the most common CB ten-codes, which are not necessarily the same ten-codes that police use.

What’s the highest a CB radio can go?

Frequencies of 28.000 MHz and higher are out of the CB channel range and into the domain of licensed Amateur Radio (ham) operators who use it exclusively for Morse code. If you own a modified export CB radio (such as the Galaxy), the 19 high setting puts you at 28.085 MHz – forbidden territory.

What does 10-100 stand for in Alabama?

10-100 Acronym Definition 10-100 Hot Pursuit (Alabama State Police radio 10-100 Bathroom Break (CB radio) 10-100 In Hot Pursuit/Chase (Alabama Public Saf

How many channels are there on a CB radio?

The following table presents the CB frequencies, the particular wavebands at which a signal is transmitted. The next columns list the corresponding 40 CB channels and the customary uses of the channels. NOAA Weather Radio all Hazards channels. Any authorized CB radio frequency is open to all, but some have agreed-upon special purposes.

https://www.youtube.com/watch?v=ylZo67nzM7g